Lincoln Electric VIKING ArcSpecs Bedienungsanleitung
Lincoln Electric
Nicht kategorisiert
VIKING ArcSpecs
Lies die bedienungsanleitung für Lincoln Electric VIKING ArcSpecs (19 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 34 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 17.5 Bewertungen. Hast du eine Frage zu Lincoln Electric VIKING ArcSpecs oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/19
GRAPHICS MAY VARY
Operator’s Manual
VIKING
™
ArcSpecs
™
Auto-Darkening Welding Goggles
with 4C
™
Technology
Register your machine:
www.lincolnelectric.com/register
Authorized Service and Distributor Locator:
www.lincolnelectric.com/locator
Save for future reference
Date Purchased
Code: (ex: 10859)
Serial: (ex: U1060512345)
IM10544 | Issue D ate Aug-19
© Lincoln Global, Inc. All Rights Reserved.
TABLE OF CONTENT Page
SAFETY WARNINGS – READ BEFORE USING 1
WELDING GOGGLE INFORMATION 2
SPECIFICATIONS 3
OPERATING INSTRUCTIONS 4
GOGGLE OPERATIONS/FEATURES 5
GRIND BUTTON OPERATION 8
GOGGLE CARE AND MAINTENANCE 9
SHADE GUIDE SETTINGS 14
TROUBLESHOOTING 15
WARRANTY INFORMATION 16
REPLACEMENT PARTS, OPTIONAL ACCESSORIES 16
SAFETY WARNINGS – READ BEFORE USING
ARC Rays can injure eyes and burn skin
• Before welding, always inspect goggle and filter lens to be sure they are fitted
properly, in good condition and not damaged.
• Check to see that the clear lens is clean and securely attached to the goggles.
• Always wear safety glasses or goggles under the welding goggles and protec-
tive clothing to protect your skin from radiation, burns and spatter.
• Ensure that optical radiation from other welder's arcs in the immediate area
does not enter in from behind the goggles and auto-darkening filter.
Note: Auto-darkening filters in Lincoln goggles are designed to protect the user against harmful
ultra-violet and infrared rays both in the dark and light states. No matter what shade the filter is
set to, the UV/IR protection is always present.
FUMES AND GASES can be dangerous to your health.
• Keep your head out of fumes.
• Use enough ventilation or exhaust at the arc or both to keep fumes and gases
from your breathing zone and general area.
• When welding with electrodes which require special ventilation such as
stainless or hard facing (see instructions on container or MSDS) or on
lead or cadmium plated steel and other metals or coatings which
produce highly toxic fumes, keep exposure as low as possible and within
applicable OSHA PEL and ACGIH TLV limits using local exhaust or
mechanical ventilation. In confined spaces or in some circumstances,
outdoors, a respirator may be required. Additional precautions are also
required when welding on galvanized steel.
1
WARNING
Refer to http://www.lincolnelectric.com/safety
for additional safety information.
Produktspezifikationen
| Marke: | Lincoln Electric |
| Kategorie: | Nicht kategorisiert |
| Modell: | VIKING ArcSpecs |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Lincoln Electric VIKING ArcSpecs benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Lincoln Electric
6 September 2024
4 September 2024
4 September 2024
4 September 2024
4 September 2024
4 September 2024
4 September 2024
4 September 2024
4 September 2024
4 September 2024
Bedienungsanleitung Nicht kategorisiert
- Trebs
- Hex
- IK Multimedia
- Sanitas
- Digitus
- Bison
- Hasselblad
- Morley
- Hisense
- Polarlite
- Pyramid
- Milan
- Dave Smith
- Zgonc
- Extralife Instruments
Neueste Bedienungsanleitung für -Kategorien-
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025