Little Giant W16G07S8-32P Bedienungsanleitung

Lies die bedienungsanleitung für Little Giant W16G07S8-32P (24 Seiten) kostenlos online; sie gehört zur Kategorie pomp. Dieses Handbuch wurde von 49 Personen als hilfreich bewertet und erhielt im Schnitt 4.0 Sterne aus 25 Bewertungen. Hast du eine Frage zu Little Giant W16G07S8-32P oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

OWNER’S MANUAL

4” SUBMERSIBLE PUMP

BEFORE INSTALLING PUMP, BE SURE TO READ

THIS OWNER’S MANUAL CAREFULLY.

Fill the pump with water before starting or

the pump will be damaged. The motor on this pump is

guaranteed by the manufacturer, and in the event of failure

it must be returned to an authorized service station for

repairs. The motor warranty is void if repairs are not made

by an authorized repair station.

INSPECT THE SHIPMENT

Examine the pump when it is received to be sure there

has been no damage in shipping. Should any be evident,

report it immediately to the dealer from whom the pump

was purchased. Please check the pump package to see

that it includes pump, motor, and motor leads (if your pump

purchase includes a motor).

This pump includes either a built-in or externally-mounted

check valve with the discharge head. Make certain that your

available voltage corresponds to that of your motor.

CAUTION

READ AND FOLLOW SAFETY

INSTRUCTIONS

This is the safety alert symbol. When you see this

symbol on your pump or in this manual, look for one of

the following signal words and be alert to the potential for

personal injury:

DANGER

warns about hazards that will cause serious

personal injury, death, or major property damage if ignored.

WARNING

warns about hazards that can cause serious

personal injury, death, or major property damage if ignored.

CAUTION

warns about hazards that will or can cause

minor personal injury or major property damage if ignored.

The label NOTICE indicates special instructions, which are

important but not related to hazards.

Carefully read and follow all safety instructions in this

manual and on pump.

Keep safety labels in good condition.

Replace missing or damaged safety labels.

Wire motor for correct

voltage. See Electrical

Information section of this manual

and motor nameplate.

Ground motor before

connecting to power supply.

Meet National Electrical

Code, Canadian Electrical

Code, and local codes for all

wiring.

Follow wiring instructions in

this manual when

connecting motor to power lines.

Hazardous voltage.

Can shock, burn, or

cause death.

Ground pump before

connecting to power

supply. Disconnect

power before working

on pump, motor

or tank.

WARNING

Franklin Electric Co., Inc.

www.franklinwater.com

[email protected]

ATTENTION!

IMPORTANT INFORMATION FOR

INSTALLERS OF THIS EQUIPMENT!

THIS EQUIPMENT IS INTENDED FOR INSTALLATION BY

TECHNICALLY-QUALIFIED PERSONNEL. FAILURE TO

INSTALL IT IN COMPLIANCE WITH NATIONAL AND LOCAL

ELECTRICAL CODES AND WITH FRANKLIN ELECTRIC

RECOMMENDATIONS MAY RESULT IN ELECTRICAL SHOCK

OR FIRE HAZARD, UNSATISFACTORY PERFORMANCE,

Form 106257101 Rev. 002 11/2013

Produktspezifikationen