Living & Co SL595B Bedienungsanleitung

Lies die bedienungsanleitung für Living & Co SL595B (1 Seiten) kostenlos online; sie gehört zur Kategorie Staubsauger. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 8 Bewertungen. Hast du eine Frage zu Living & Co SL595B oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

MODEL :SL595B

CONN:TETS

Product Overview

2

Description

2

Tecnicalh Specifications3

Accsseories

3

Important safeguards

4-5

Safety warning

5

Battery Charging

5

Assembly and Operation

6-7

Description of Floor Vacuum Head

7

Emptying the dust collection container

7-8

Cleaning the HEPA filter

8-9

Cleaning the motorized power head

9

Maintenance

9

Troubleshooting

10

Responsible disposal

11

Warranty

11

PRODUCT OVERVIEW:

K

A

B

C

D

F

G

H / I

E

J

DESCRIPTION

G.Fiter coverl

H.Small brush attachment

I.Nozzle attachmetn

J.Mounting screws

K.Wall bracket

L.Release actuator for dust canister

A.O n/OffSwtchi

B.Handle

C.Vacum Roud

D.Dust collection compartment

E.Floor vacuum head

F.HEPA filter

TECHNICAL SPECIFITIONS CA

Charger

Inp 102V~50/Hz 0.5A ut：0-4060

Rated vtage18.5V --- ol：

tt 22V---0mAOupu：50

Vacuum

Molde no. SL595 ：

Ratpored we

：11W 5

Operation time: min 20-30

Chaitirgng meH ：5-6

BatrteyLi-in 2200mAh：o

ACCESSORIES

Power head

Vacum u

rod

2 in 1 nozle z

Charger

IMPORTANT SAFEGUARDS

Read this manual thoroughly before first use, even if you are familiar with this type of product.

The safety precautions enclosed reduce the risk of fire, electric shock and injury when correctly

adhered to:

READ ALL INSTRUCTIONS BEFORE USING YOUR VACUUM CLEANER AND KEEP THIS

MANUAL FOR FUTURE REFERENCE.

Always follow basic safety precautions and accident prevention measures when using an

electrical appliance including the following;

1.Before using the appliance, check that mains supply voltage corresponds to the voltagethe

shown on the rating plate.

2.Always remove the plug from the power socket when the appliance is not in use and before

carrying out any cleaning or maintenance operations.

3.Never use methylated spirits or other solvents to clean the appliance.

4.Do not use the appliance to vacuum up liquids or damp items.

5.This appliance is designed for attended use only, never leave the appliance unattended whenit

is switched on.

6.Keep the appliance out of reach from children or the infirm.

7.This appliance is intended for domestic use only. Use as described in this instruction booklet.

8.Do not operate the appliance if it has been dropped / damaged or appears to be faulty.

9.Do not handle the supply plug or the appliance with wet hands.

10.

Do not pull or carry by the supply cord, or pull cord around sharp edges or corners.

11.

If the supply cord is damaged, it must be

replaced by the manufactureits r orservice

agentor a similarly qualified in order to avoid a hazard.person

12.

Ths ce causeby chreaged from 8 years and above and personsiappliann bed ildn with

reduced physical, sensory or mental capabilities or lack of experience and knowledge if

they have been given supervision or instruction concerning use of the appliancein

a safe

waynd a understand the hazards involved.

13.Childnallnoplawire sh t y th the appliance. Cleaning and user maintenance shall not be

made by children without supervision.

14.Keep the appliance and its cord out of reach of children less than 8 years.

15.Do not remove the plug from the by pulling the cable or the appliance itself.socket

16.Donoeapplian t use th ce to vacuum anything that is or smoking such as matches,burning

cigarette ends and hot ash.

17.Do not use the appliance on wet surfaces.

18.Do not obstruct the air intake or outlet vent.

19.Do not use the appliance to vacuum needles, drawing pins or strings.

20.Not intended for outdoor use.

21.Switch off the appliance using the on/off switch and the wall socket switch before removing

the plug from the electrical socket outlet.

22.Keep end of hose, rods and other openings away from your face and body.

23.Do not use the vacuum cleaner without the dust collection container or filters in place.

24.Keep hair,loose clothing and all parts of the body away from openings and moving parts.

Do not run the applianceDo not obstruct the air intake

over the power cable.or outlet vents.

SAFETY WAINGS! RN

Do not remove the plug from

the socket by the pulling cable

of the Hold the appliance. plug

instead.

Do not use the appliance onDo not use the appliance toDo not use the appliance to

wesurfaces.vacm matcs,to vacm srp jects such t uuheuuhaob

cigarette ends or hot ash.as needles or drawing pins

BATTERY CHARGING:

1.Please make sure that product is powered off, connect the charger to the mains supply

socket, switch the socket on and t cct t cr tt connector into the powerhenonnehehageleadoupu

inlet on the right side of the cleaner body.

2.T ts f ce to indicate charging is in process. When charginghreecharginglighlashoninsequen

is complete, all 3 lights stay illuminated for 3 minutes and then all switch off.Note, chargi ng

time will vary depending on the status of the battery prior to connection, however if completely

flat then a charge time of around 4 – 5 hours will be required.We recommend charging fully

and then fully discharging for the initial 1 – 3 times of first use.

WARNING: -Do not turn on the product and Do not try removing battery during it’s charging!

-Only charge when ambient is within 10 – 40 degrees Celcius, charging outside

of this may damage the battery.

1.Ensure battery is suitably charged, refer ‘ section above for furtherBattery Charging’

information

2.Insert one end of the vacuum rod onto the inlet nozzle of the main vacuum body (refer

image below).

3.Insert the vacuum head floor attachment nozzle onto the

opposite rod.end of the

4.-As alternative floor 2-inan to using the vacuum head, the 1 nozzle attachment becan

used for furniture / shelves (ideal etc).

5.Ensure the dust is correctly collection container fitted to ‘Dustthe main body (refer

collection container cleaning’ section).removal and filter

6.Whilst the by the handle, the power button on the main body holding appliance press to

start appliance.

7.Pressing the power () button once activates low power, pressing again switchesON/OFF

the vacuum off. Press the (button to activate high power.MAX)

8.When battery is running out of power, the Power light on body keeps flashing on until the

product turns itself off. Follow Battery Charging section for further information.

9.The motorized vacuum power head operates at high speed. To avoid damage to

cleaning surface, do not leave this in the same spot for too long.

10.The motorized vacuum power head has over-heating protection function which canan

cut off the power to nozzle when blockage temporary jamming occurs. If this occurs,or

please switch off the product, unblock and clean the nozzle. Do not use the product until

it cools down.

11.When you have finished using the push the power button again to switch off.appliance,

12.Check dust collection container contents and empty if , requiredneveralloweconine th tar

to exceed the maximum mark.

13.Store the product for later use in a dry, well ventilated location.

Emptying the dust collection container

1.Switch

the unit and off remove body.the vacuum rod from the

2.Whilst the of the ) positioning underside collection contain (refer imageover a ru,bbish bin

pueleaipledownwaonecolleconconinerbodwhichwillallowesh th rese cl ver rds th ti ta y, th

hinged lower cover to open.

3). tap container contents close Gently the collection body to allow to fall out, once complete,

the cover so it locks into hinged that back position.

CLEANING THE HEPA FILTER

The filter should be cleaned regularly or after heavy use. o access the filter, follow T

the instructions for ‘Emptying the dust collection container’ up to instruction 2), then

proceed as follows;

1). With to one reach in hand, hold the

filter rotate cover and anti-clockwise to allow the

filter cover container. to unlock removed and release, this can be now from the collection

2). Wipe any surface remaining dust / dirt from the cover. filter

3). filter With the cover removed, epa the Hfilter can now be removed within from the machine:

4). Remove the Hepa body filter by the from the machine rotating filter anti clock-wise

to release, machine. then pull away from the

5). Wahepdepositdirt. sh the a filter under water to remove dust running s and

6). Shake out all and leave to least 24 hours excess water, fully at dry for (naturally)

before placing back machine. into the

WARNING: Failure to follow this instruction will

compromise the effectiveness safety and reduce

of the vacuum. machine. The filter cannot be in the cleaned washing

7). Once completely dry, re-insert the filter back into the by the machine aligning locating

ridges rotating clockwise position. and to lock in

5). Re-insert the filter cover to container rotate position. the collection and clock-wise to lock in

6). Close the lower cover it hinged until ‘clicks’ to lock in position.

CLEANING THE POWER MOTORISED HEAD

1). Turn off release head. the power and the motorised power

2). the button on the bottom of nozzle by a flat object such as a to to Turn using coin rotate

the “unlock” position.

3). the roller brush and Lift up remove.

4). Along the

groove on the roller, remove twirled hair or blockage by scissors or knife.

5). Place back the roller and turn cleaned the button back to the “lock” position.

MAINTNANCEE

It is important that the dust collection container is regularly emptied and that the inlet / outlet

filters are regularly cleaned – follow the section ‘Emptying the dust collection container and filter

removal / cleaning’ earlier in this manual.

If the body of the appliance requires cleaning, use a dry cloth. use rasive scourin Do not abg

pads or cleaning products.

appliance is inhe on position. t

powerbuton the position. tto on

Suion power ct

becomeweak s

1.Check if he vacuum rod or floort

vacuum head is clogged or damaged.

2.Check if the dust colleionct

container is full.

3.Check if he filters ar clogged.te

1.Remove the obstruction and clean any

dust build up.

2.Empty the dust collection container.

3Remove and cleanheiltershen. t f t

reasseble.m

Operating time

seems shorter

than previous

1.Battery not fully charged

2.Battery aging

1.Follow charging insruensuretctions

battery is fully (flat) and discharged then

leave uninterrupted to charge for full

recommended hours).time (- 45

2.Afteran ended extperiod ofuse

(outs

ideof warranty period) the

effectiveness of reduce thebaterwill ty as

tt rend of lifehe produceaches.

Responsible disposal

At the end of its working life, do not throw this appliance out with your household rubbish. Electrical and

electronic products contain substances that c ve a triment effect t vironmt hum anhadealonheenenandan

health if disposed of inappropriately. Observe any local regulations regarding the disposal of electrical

consumer goods and dispose of it appropriately for recycling. Contact your local authorities for advice on

recycling facilities in your area.

SL595B IM (convert) CV 23 06 2020说明书 2020.6.29

1

7911

352

6810

4

INSTRUCTION MANUAL

CORDLESS STICK VACUUM CLEANER

ASSEMBLY AND OPERATION

Instructions for use:

Floor Vacuum Head

The floor vacuum head can be used on bare floors (wood / tile / vinyl / concrete etc). o T

assist with the movement and function of the vacuum , the rsid includes a headundeemotor

driven .brush

Problem

Possible CausessenPoibl Solutio

Vacuum cleaner

does not work

1.Baery islattt f

2Cheithe powebuon ohe.ck f r ttf t

1.Follow insthe charging tructions.

2.Press the vacuum cleaner

TROUBLESHOOTING

Please check the following details before you have your appliance repaired by an authorised

servicing agent

L

2

2

Wall Mounting Bracket

1.The wall mounting bracket provided can be used to support the vacuum when not in

operation, along with support of the small brush / nozzle attachment.

2.Find a suitable wall location clear of obstacles / doors. Ensure well clear from heating

sources (such as oven / wall heaters / wood burning stoves etc). Do not locate within a damp

or wet room such as bathrooms / laundry.

3.Once a suitable location has been identified, place the bracket on the wall at a height just

above the length of the vacuum. Use the screws provided to secure to the wall but ensure

they will screw into a solid material such as wood (ie position in front of a wall stud / nog). If

you need to secure to a Gib or plasterboard wall you will need to obtain suitable wall anchor

plugs (available from a hardware shop).

4). Once secured to the wall, place the vacuum and attachment as shown below.

Wall mounting bracket and screws

CLEANING THE HEPA FILTER CONTINUED:

Produktspezifikationen