Lorex AX8 Bedienungsanleitung


Lies die bedienungsanleitung für Lorex AX8 (13 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 23 Personen als hilfreich bewertet und erhielt im Schnitt 4.8 Sterne aus 12 Bewertungen. Hast du eine Frage zu Lorex AX8 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/13
AX8 Series
What's Included • Ce qui est inclu • Qué está incluido
Tools Needed / Outils nécessaires / Herramientas necesarias:
Drill
Perceuse / Taladro
Screwdriver
Tournevis / Destornillador
EN / FR / ES
PoE Switch
Commutateur PoE
Conmutador PoE
LNK
PoE-in-Use
ACT
Gigabit PoE+ Switch
Power Cord
Câble d’Alimentation
Cable de Alimentación
Rack Mount Brackets (2×)
Support de Montage sur
Châssis
Soporte de Montaje de
Estante
Rubber Feet (4×)
Pieds en Caoutchouc
Pata de Goma
Screws (8×)
Vis
Tornillos
1
Follow all instructions for safe use and best performance.
Use the switch within given temperature, humidity and voltage levels
noted in the switch specications.
Do not disassemble the switch.
You may need to clean periodically using a cloth. If you need to clean
the switch, disconnect it from its power source rst. Do not clean
the switch with any liquid, harsh, chemical-based cleaners, or damp
materials.
Keep the switch away from water and out of damp areas.
Not intended for submersion in water. Installation in a sheltered
location recommended.
Do not place the switch on unstable surfaces and avoid dropping the
switch.
Allow for adequate space for ventilation between the device and
objects around it.
Ensure that the operating voltage is the same as labeled in the switch.
EN - Safety Precautions FR - Mesures de sécurité
2
EN - Product Description
ES - Precauciones de seguridad
Siga todas las instrucciones para un uso seguro y el mejor
rendimiento.
Utilice el conmutador dentro de los niveles de temperatura, humedad
y tensión indicados en las especicaciones del conmutador.
No desarme el conmutador.
Es posible que tenga que limpiarlo de manera periódica con un
paño. Si necesita limpiar el conmutador, primero desconéctelo de la
fuente de alimentación. No limpie el conmutador con ningún líquido,
limpiador químico fuerte o materiales húmedos.
Mantenga el conmutador alejado del agua y de zonas húmedas.
No está diseñado para sumergirse en agua. Se recomienda su
instalación en un lugar protegido.
No coloque el conmutador sobre supercies inestables y evite que se
caiga.
Deje un espacio adecuado para la ventilación entre el dispositivo y los
objetos que lo rodean.
Asegúrese de que la tensión de funcionamiento sea la misma que la
indicada en la etiqueta del conmutador.
4


Produktspezifikationen

Marke: Lorex
Kategorie: Nicht kategorisiert
Modell: AX8

Brauchst du Hilfe?

Wenn Sie Hilfe mit Lorex AX8 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten