Lorex ST1101 Bedienungsanleitung


Lies die bedienungsanleitung für Lorex ST1101 (26 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 8 Personen als hilfreich bewertet und erhielt im Schnitt 3.6 Sterne aus 4.5 Bewertungen. Hast du eine Frage zu Lorex ST1101 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/26
ST1101 Physical Setup
Step by Step Instructions
1. Unlock the support access with the attached keys remove it from the support. and
2. Pull out and hold the hook-like metal bolt and turn the support clockwise until the bolt can
reach the hole on the other side Tand lock in place. hen release the bolt.
3. Pull out the curved pin, then remove the metal bolt to unlock the support.
4. Once unlocked, pull out the support and lock it again with the metal bolt and curved pin.
5. S tore the hand crank. Then replace the yellow support access and lock it back into position
with the keys.
6. Unlock the curved pin from the tow arm and remove the metal bolt. Lift the tow arm and
stabilize it in place. Once it's stabilized, re-secure it with the metal bolt and curved pin.


Produktspezifikationen

Marke: Lorex
Kategorie: Nicht kategorisiert
Modell: ST1101

Brauchst du Hilfe?

Wenn Sie Hilfe mit Lorex ST1101 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten