Lorus Sports R2B01AX9 Bedienungsanleitung

Lies die bedienungsanleitung für Lorus Sports R2B01AX9 (2 Seiten) kostenlos online; sie gehört zur Kategorie betrachten. Dieses Handbuch wurde von 29 Personen als hilfreich bewertet und erhielt im Schnitt 4.1 Sterne aus 7 Bewertungen. Hast du eine Frage zu Lorus Sports R2B01AX9 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

■C H A R A C T E R I S T IC S

1. Analogue & digital time displays:Hour,

Minute, Second, Month, Date and Day of the

week.

2. Daily alarm and hourly chime:The alarm

can be set to sound at the designated time

on a 24-hour basis and the chime can be set

to sound every hour on the hour with a single

beep.

3. Stopwatch: The stopwatch can measure

up to 23 hours 59 minutes and 59 seconds

in 1/100-second increments. Split time

measurement is available.

4. Selection of 12 or 24-hour format:The time

display format in either 12-hour indication or

24-hour indication can be selected.

5. EL backlight:The built-in electro-luminescent

(EL) backlight illuminates the display for easy

viewing in darkness.

■DISPLAY AND BUTTON FUNCTION

■ SETTING THE TIME (ANALOGUE)

1. Pull the crown out one step, the second hand

will stop.

2. Set the correct time by turning the crown.

3. Push the crown back to the original position.

The watch will start running again.

* The analogue indication and digital display of

the time setting can be adjusted separately.

Z 02 1

Z 0 2 6

NREZ021C 1-2019

CAL. Z021 (RW6 SERIES)

CAL. Z026 (R2B SERIES)

C R O W N

■ HOW TO SET TIME/CALENDAR

1.

From NORMAL TIME mode, p

ress S3 button

three times to begin setting procedure.

The second digits start flashing.

2. Press S1 button to reset the second digits to

zero.

* If S1 button is pressed when the second digits

are in a range between 30 and 59, the second

digits will be reset to 00 and one minute will be

added. If S1 button is pressed when the second

digits are in a range between 00 and 29, the

second digits will be reset to 00 and the minute

digits will be unchanged.

3. Press S2 button to move on to HOURS setting.

* Selection of the digits to be adjusted is made in

the following order by pressing S2 button. Press

S1 button to adjust the value.

* When setting HOURS, “H” stands for 24-hour

format, “A” or “P” stands for 12-hour format.

SECONDS

DATE

DAY OF

THE WEEKMONTH

MINUTESHOURS

S2

S2

S2

S2

S2

12/24H-

FORMAT

S2

S4 (LIGHT)

H O U R S

DAY OF WEEK

C H IM E

DAT E

M I NU T E SS EC O NDS

A L A R M

S3 (MODE)S2 (RESET)

M O N TH

S 1 ( S T A R T/ S T OP )

S3

■ HOW TO SET ALARM TIME

■HOW TO CHANGE THE DISPLAY

MODE

STOPWATCH mode

1. From NORMAL TIME mode,

press S3 button

twice to enter the ALARM mode.

2. Press S2 button to begin setting procedure.

The hours digit starts flashing.

3. Press S1 button to set HOURS setting.

4. Press S2 button to move on to MINUTES setting.

Press S1 button to set MINUTES setting.

5. Press S2 button to confirm the settings.

6. Press S3 button to return to NORMAL TIME

mode.

*

Press S3 button to show the

NORMAL TIME

mode.

* If the mode is shown already on NORMAL TIME

the display, skip the above operation.

* in Press S3 button to change the display mode

the following order.

NORMAL TIME mode

S3

ALARM mode

S3

S3

S2

HOURS SETTING BY

PRESSING S1

MINUTES SETTING BY

PRESSING S1

S2

TIME SETTING mode

ALARM modeNORMAL TIME mode

S3

PRESS

S3

t w i c e

S2

for confirmation

4. Press S3 button after completing the setting.

NORMAL TIME

MINUTES SETTING BY

PRESSING S1

HOURS SETTING BY

PRESSING S1

SECONDS SETTING

BY PRESSING S1

PRESS

S3

3 times

S2

S2

MONTH SETTING BY

PRESSING S1

DATE SETTING BY

PRESSING S1

S3

S2

DAY OF WEEK SETTING

BY PRESSING S1

S2

S2

S2

S4 (LIGHT)

H O U R S

DAY OF WEEK

DAT E

M I NU T E S

S EC O NDS

A L A R M

S3 (MODE)S2 (RESET)

S 1 ( S T A R T/ S T OP )

M O N TH

C H IM E

NREZ021C.indd 12018/12/06 14:53

Produktspezifikationen