LYYT ILADC4 Bedienungsanleitung

Lies die bedienungsanleitung für LYYT ILADC4 (2 Seiten) kostenlos online; sie gehört zur Kategorie Empfänger. Dieses Handbuch wurde von 16 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 8.5 Bewertungen. Hast du eine Frage zu LYYT ILADC4 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

ILC4 and ILA4

IN-LINE CONTROLLER AND

AMPLIFIER FOR RGB LED TAPE

Item ref: 2153.771UK, 153.70UK,

153.701UK

User Manual

WARNING: These products are intended for professional installation of RGB LED tape and

should be connected by qualified personnel in accordance with electrical safety standards.

Ensure that the rated load indicated is not exceeded.

Installation

The ILC4 controller can be employed to control Fluxia RGB LED tape operating from a 5-24Vdc

power supplyMaximum short term current load is rated at 3 x 4A. For constant full power .

output, it is advised to limit this to 3 x 2A load.

There are 2 versions of Fluxia RGB LED tape - 153.720UK has 60 LEDs per metre and

153.7 has 30 LEDs per metre. It is recommended that each controller is connected to no 21UK

more than 300 RGB LEDs (i.e 1 x 5m roll of 153.720UK or 2 x rolls of 153.721UK connected in

parallel).

For longer runs, each subsequent roll should be linked on using the ILA4 amplifier.

The ILA4 also accepts 5-24Vdc and connects from the end of a controlled length of RGB LED

tape to the beginning of the next length of RGB LED tape to match the patterns/colours of the

first tape. (also 3 x 4A peak, 3 x 2A continuous output)

Connection is via a 4-pin coupler, as supplied with Fluxia RGB LED tape.

E on the LED tape. nsure that the red triangle is connected to “+” or “Common”

Produktspezifikationen