Magnus REX DSF-132 Bedienungsanleitung

Magnus Stativ REX DSF-132

Lies die bedienungsanleitung für Magnus REX DSF-132 (4 Seiten) kostenlos online; sie gehört zur Kategorie Stativ. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 4.8 Sterne aus 2 Bewertungen. Hast du eine Frage zu Magnus REX DSF-132 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/4
Dolly for Video Tripods
with Dual-Angle Spiked Feet
Owners
Manual
DSF-132
Assembling the dolly:
Rotate the outside legs into position, and secure by
tightening the locking knob
. When collapsed, use
the handle
5
for transport.
Locking the wheels:
Use the brake tabs
to lock and unlock the wheels.
Mounting your tripod:
1. Remove your Magnus tripod’s rubber feet if
they’re attached. Then, fit the slot in the tripod’s
spiked feet onto the leg supports
2
. You may need
to adjust the tripod’s leg length or spreader angle
to properly fit the tripod feet into the leg supports.
2. Pull the locking straps
4
onto the notches on the
outer edges of the tripod feet.
Using Your DSF-132 Dolly
5 5
4
2
3
Dolly Components
Specifications
Working Footprint: 37 in. (94 cm)
Maximum Load: 132 lb. (59.9 kg)
Folded Length: 20 in. (50.8 cm)
Wheel Diameter: 4 in. (10.2 cm)
Images are for illustrative purposes only


Produktspezifikationen

Marke: Magnus
Kategorie: Stativ
Modell: REX DSF-132

Brauchst du Hilfe?

Wenn Sie Hilfe mit Magnus REX DSF-132 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten