MAGUS Bio 240T Bedienungsanleitung
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für MAGUS Bio 240T (28 Seiten) in der Kategorie Mikroskop. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.3 Sternen bewertet
Seite 1/28
MAGUS BIO 240B | 240T | DH240
BIOLOGICAL MICROSCOPE
U S E R M A N U A L
2
Before using the microscope, please read this user manual carefully
to study the instrument design, operation modes and procedures, operational
limitations, and safety precautions.
Due to the continuous improvements in the microscope design, this manual
may not reflect minor design changes that do not affect the microscope
performance and operation procedures.
SAFET Y PRECAUTIONS
1. To avoid electric shock or fire, switch off and unplug the microscope before assembling
the microscope, replacing the bulb or power adapter.
2. Do not disassemble the microscope, except for the removable parts specified in this manual.
This can seriously damage its performance. In case of malfunction, please contact a qualified
service center.
3. Make sure that the input voltage of the microscope matches that of the local power supply.
Using the power supply with the wrong input voltage may cause a short circuit or fire.
4. Using an incorrect bulb, adapter, or power cord may damage the microscope or cause a fire.
The power cord must be grounded reliably.
5. Do not apply excessive force to the power cord: do not bend or twist it. Use the adapter
and power cord included in the microscope kit.
6. If water splashes on the microscope, immediately switch the power off, unplug the power
cord, and wipe off the water with a dry cloth.
7. In order to avoid a short circuit or any other malfunction, do not expose the microscope
to high temperatures or humid or moist environments for a long period of time.
8. The microscope light bulb generates high temperatures during operation. To avoid burns,
do not touch the collector lens or the bulb itself for 10 minutes after the lights have been
switched off. To prevent fire, do not place paper or flammable or explosive materials near
the air vents on the underside of the base.
9. The microscope employs a coaxial coarse/fine focusing mechanism. Do not turn the left/right
coarse/fine focusing knobs in opposite directions. When the limit is reached, you should
no longer rotate the coarse focusing knob.
10. Do not expose the microscope to direct sunlight or other light sources. Do not expose
the microscope to high temperatures, humidity, or dust; otherwise, it may cause
condensation, mold growth, or contamination of the optical parts.
3
11. Do not use any other oily substance instead of proper immersion oil made specifically for
the given purpose, as this will degrade the image quality and damage the lenses.
12. Do not touch the lens surfaces with your fingers. Use a brush and special lens-cleaning
solution to keep the lenses clean.
13. Bulb installation. This microscope employs LED bulbs as a light source. The bulbs should
be replaced by the equipment vendor or in a qualified service center. If you replace the LED
yourself, the illumination function may be impaired.
Produktspezifikationen
| Marke: | MAGUS |
| Kategorie: | Mikroskop |
| Modell: | Bio 240T |
Brauchst du Hilfe?
Wenn Sie Hilfe mit MAGUS Bio 240T benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Mikroskop MAGUS
12 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
Bedienungsanleitung Mikroskop
- Mikroskop Boeco
- Mikroskop Swift
- Mikroskop Learning Resources
- Mikroskop Traveler
- Mikroskop Vivitar
- Mikroskop Olympus
- Mikroskop BeaverLab
- Mikroskop Levenhuk
- Mikroskop National Optical
- Mikroskop PCE Instruments
- Mikroskop Dino-Lite
- Mikroskop National Geographic
- Mikroskop DNT
- Mikroskop Maginon
- Mikroskop Barska
Neueste Bedienungsanleitung für -Kategorien-
11 Juni 2025
11 Juni 2025
9 Juni 2025
8 Juni 2025
8 Juni 2025
8 Juni 2025
3 Juni 2025
16 Oktober 2024
18 September 2024
6 September 2024