MAGUS Metal V790 Bedienungsanleitung
Lies die bedienungsanleitung für MAGUS Metal V790 (28 Seiten) kostenlos online; sie gehört zur Kategorie Mikroskop. Dieses Handbuch wurde von 5 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 3 Bewertungen. Hast du eine Frage zu MAGUS Metal V790 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/28
M A G U S M E TA L V 7 9 0 D I C
M E TA L L U R G I CA L I N V E RT E D M I C R O S C O P E
2
Before using the microscope, please read this user manual carefully to
study the instrument design, operation modes and procedures, operational
limitations, and safety precautions.
Due to the continuous improvements in the microscope design, this manual
may not reflect minor design changes that do not affect the microscope
performance and operation procedures.
SAFET Y PRECAUTIONS
1. To avoid electric shock or fire, switch off and unplug the microscope before assembling the
microscope, replacing the bulb or fuse.
2. Do not disassemble the microscope, except for the removable parts specified in this manual.
This can seriously damage its performance. In case of malfunction, please contact a qualified
service center.
3. Make sure that the input voltage of the microscope matches that of the local power supply.
Using the power supply with the wrong input voltage may cause a short circuit or fire.
4. Using an incorrect bulb, fuse, or power cord may damage the microscope or cause a fire. The
power cord must be grounded reliably.
5. In order to avoid a short circuit or any other malfunction, do not expose the microscope to high
temperatures or humid or moist environments for a long period of time.
6. If water splashes on the microscope, immediately switch the power off, unplug the power
cord, and wipe off the water with a dry cloth.
7. The microscope light bulb generates high temperatures during operation. To avoid burns,
do not touch the collector lens or the bulb itself for 10 minutes after the lights have been
switched off. To prevent fire, do not place paper or flammable or explosive materials near the
air vents on the underside of the base.
8. The microscope employs a coaxial coarse/fine focusing mechanism. Do not turn the left/right
coarse/fine focusing knobs in opposite directions. When the limit is reached, you should no
longer rotate the coarse focusing knob.
9. Do not expose the microscope to direct sunlight or other light sources. Do not expose the
microscope to high temperatures, humidity, or dust; otherwise, it may cause condensation,
mold growth, or contamination of the optical parts.
10. Do not touch the lens surfaces with your fingers. Use a brush and special lens-cleaning
solution to keep the lenses clean.
3
Handle
11. Bulb installation:
–
Do not touch the glass surface of the bulb with your bare hands. When installing the bulb, wear
gloves or wrap the bulb with a cotton cloth.
–
Use a clean cotton cloth moistened with alcohol-based disinfectant to wipe dirt off the
surface of the bulb. Dirt may etch the surface of a bulb, thereby reducing its brightness and
shortening its life.
–
Check the bulb contact condition. If contact damage occurs, the bulb may stop working or
cause a short circuit.
–
When replacing the bulb, its base should be inserted as deeply as possible into the socket.
If the bulb is not correctly inserted, it may pop out of the socket or cause a short circuit.
ATTENTION! Move the microscope only using its handles!
Handle
Produktspezifikationen
| Marke: | MAGUS |
| Kategorie: | Mikroskop |
| Modell: | Metal V790 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit MAGUS Metal V790 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Mikroskop MAGUS
12 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
Bedienungsanleitung Mikroskop
- Carson
- Zeiss
- Maginon
- National Optical
- Discovery
- Celestron
- Steinberg
- DNT
- Barska
- Hama
- PCE Instruments
- Swift
- National Geographic
- Toolcraft
- Reflecta
Neueste Bedienungsanleitung für -Kategorien-
11 Juni 2025
11 Juni 2025
9 Juni 2025
8 Juni 2025
8 Juni 2025
8 Juni 2025
3 Juni 2025
16 Oktober 2024
18 September 2024
6 September 2024