Makita UR003GD201 Bedienungsanleitung
Makita
Nicht kategorisiert
UR003GD201
Lies die bedienungsanleitung für Makita UR003GD201 (28 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 28 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 14.5 Bewertungen. Hast du eine Frage zu Makita UR003GD201 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/28
INSTRUCTION MANUAL
Cordless Grass Trimmer
UR002G
UR003G
ENGLISH: Original instructions
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: UR002G UR003G
Handle type Bike handle Loop handle
No load speed
(at each rotation speed level)
Cutter blade /
Nylon cutting head /
Plastic blade
3: 0 - 6,500 min-1
2: 0 - 5,300 min-1
1: 0 - 3,500 min-1
Overall length
(without cutting tool)
1,760 mm
Nylon cord diameter 2.0 - 2.4 mm
Applicable cutting tool and
cutting diameter
3-tooth blade
(P/N: 195298-3)
230 mm
4-tooth blade
(P/N: 195150-5)
230 mm
8-tooth blade
(P/N: B-14130)
230 mm
Nylon cutting head
(P/N: 198893-8)
350 mm
Plastic blade
(P/N: 198383-1)
255 mm
Rated voltage D.C. 36 V - 40 V max
Net weight 4.6 - 5.0 kg 4.1 - 4.4 kg
Protection degree IPX4
•
Due to our continuing program of research and development, the specications herein are subject to change without notice.
• Specications may dier from country to country.
• The weight may dier depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge BL4020 / BL4025 / BL4040
Charger DC40RA
•
Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.
WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or re.
Recommended battery adapter
Battery adapter PDC1200 / PDC01
• The battery adapter(s) listed above may not be available depending on your region of residence.
• Before using the battery adapter, read instruction and cautionary markings on the battery adapter.
Noise
Model UR002G
Cutting tool
Sound pressure level (L
pA )
dB(A)
Sound power level (LWA)
dB(A)
Applicable
standard
LpA dB(A) Uncer-
tainty (K)
dB(A)
L
WA dB(A) Uncer-
tainty (K)
dB(A)
4-tooth blade 74.4 1.9 87.6 0.3
ISO22868
(ISO11806-1)
Nylon cutting head 72.2 1.7 89.7 2.2
ISO22868
(ISO11806-1)/
EN50636-2-91
Plastic blade 74.4 0.7 85.3 0.8
ISO22868
(ISO11806-1)/
EN50636-2-91
3 ENGLISH
Model UR003G
Cutting tool
Sound pressure level (L
pA)
dB(A)
Sound power level (LWA)
dB(A)
Applicable
standard
LpA dB(A) Uncer-
tainty (K)
dB(A)
LWA dB(A) Uncer-
tainty (K)
dB(A)
4-tooth blade 74.4 1.9 87.6 0.3
ISO22868
(ISO11806-1)
Nylon cutting head 72.2 1.7 89.7 2.2
ISO22868
(ISO11806-1)/
EN50636-2-91
Plastic blade 74.4 0.7 85.3 0.8
ISO22868
(ISO11806-1)/
EN50636-2-91
• Even if the sound pressure level listed above is 80 dB (A) or less, the level under working may exceed 80 dB
(A). Wear ear protection.
NOTE: The declared noise emission value(s) has been measured in accordance with a standard test method and
may be used for comparing one tool with another.
NOTE: The declared noise emission value(s) may also be used in a preliminary assessment of exposure.
WARNING: Wear ear protection.
WARNING: The noise emission during actual use of the power tool can dier from the declared val-
ue(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.
WARNING: Be sure to identify safety measures to protect the operator that are based on an estimation
of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the
times when the tool is switched o and when it is running idle in addition to the trigger time).
Vibration
Applicable standard : ISO22867(ISO11806-1)
Model UR002G
Cutting tool Left hand Right hand
ah,W (m/s2 ) Uncertainty K
(m/s2)
ah,W (m/s2 ) Uncertainty K
(m/s2)
4-tooth blade 2.5 1.5 2.5 1.5
Nylon cutting head 2.5 1.5 2.5 1.5
Plastic blade 2.5 1.5 2.5 1.5
Model UR003G
Cutting tool Left hand Right hand
ah,W (m/s2 ) Uncertainty K
(m/s2)
ah,W (m/s2 ) Uncertainty K
(m/s2)
4-tooth blade 2.5 1.5 2.5 1.5
Nylon cutting head 2.5 1.5 2.5 1.5
Plastic blade 2.5 1.5 2.5 1.5
NOTE: The declared vibration total value(s) has been measured in accordance with a standard test method and
may be used for comparing one tool with another.
NOTE: The declared vibration total value(s) may also be used in a preliminary assessment of exposure.
WARNING: The vibration emission during actual use of the power tool can dier from the declared
value(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.
WARNING: Be sure to identify safety measures to protect the operator that are based on an estimation
of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the
times when the tool is switched o and when it is running idle in addition to the trigger time).
Produktspezifikationen
| Marke: | Makita |
| Kategorie: | Nicht kategorisiert |
| Modell: | UR003GD201 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Makita UR003GD201 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Makita
17 Juli 2025
16 Juli 2025
16 Juli 2025
16 Juli 2025
16 Juli 2025
16 Juli 2025
16 Juli 2025
16 Juli 2025
16 Juli 2025
16 Juli 2025
Bedienungsanleitung Nicht kategorisiert
- Zedar
- Z CAM
- Bliss Outdoors
- Luxor
- Triton
- Zweibrüder
- I.R.I.S.
- Greemotion
- Integral
- Adviti
- Aiwa
- Peach
- Summit Audio
- SIG Sauer
- John Deere
Neueste Bedienungsanleitung für -Kategorien-
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025