Maktec MT071 Bedienungsanleitung
Maktec
Schraubenmaschine
MT071
Lies die bedienungsanleitung für Maktec MT071 (40 Seiten) kostenlos online; sie gehört zur Kategorie Schraubenmaschine. Dieses Handbuch wurde von 25 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 13 Bewertungen. Hast du eine Frage zu Maktec MT071 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/40
GB Cordless Driver Drill Instruction manual
F Perceuse-Visseuse sans Fil Manuel d’instructions
D Akku-Bohrschrauber Betriebsanleitung
I Trapano avvitatore a batteria Istruzioni per l’uso
NL Accuschroef-boormachine Gebruiksaanwijzing
E Atornillador Taladro Manual de instrucciones
Inalámbrico
P Furadeira/ Parafusadeira a Manual de instruções
Bateria
DK Akku bore-skruemaskine Brugsanvisning
GR Δραπανοκατσάβιδο μπαταρίας Οδηγίες χρήσης
MT070
MT071
2
1 2
3 4
5 6
7
1
23
4
5
AB6
7
8
9
10
11
12
3
ENGLISH (Original instructions)
Explanation of general view
SPECIFICATIONS
• Due to our continuing programme of research and development, the specifications herein are subject to change without
notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use ENE034-1
The tool is intended for drilling and screw driving in wood,
metal and plastic.
General Power Tool Safety
Warnings GEA010-1
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
CORDLESS DRILL SAFETY
WARNINGS GEB051-2
1. Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
2. Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring. Cutting
accessory contacting a “live” wire may make exposed
metal parts of the power tool “live” and could give the
operator an electric shock.
3. Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
4. Hold the tool firmly.
5. Keep hands away from rotating parts.
6. Do not leave the tool running. Operate the tool
only when hand-held.
7. Do not touch the drill bit or the workpiece
immediately after operation; they may be
extremely hot and could burn your skin.
8. Some material contains chemicals which may be
toxic. Take caution to prevent dust inhalation and
skin contact. Follow material supplier safety data.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product (gained
from repeated use) replace strict adherence to safety
rules for the subject product. MISUSE or failure to
follow the safety rules stated in this instruction
manual may cause serious personal injury.
IMPORTANT SAFETY
INSTRUCTIONS ENC009-1
FOR BATTERY CARTRIDGE
1. Before using battery cartridge, read all
instructions and cautionary markings on (1)
battery charger, (2) battery, and (3) product using
battery.
2. Do not disassemble battery cartridge.
3. If operating time has become excessively shorter,
stop operating immediately. It may result in a risk
of overheating, possible burns and even an
explosion.
4. If electrolyte gets into your eyes, rinse them out
with clear water and seek medical attention right
away. It may result in loss of your eyesight.
5. Do not short the battery cartridge:
1. Red indicator
2. Button
3. Battery cartridge
4. Switch trigger
5. Reversing switch lever
6. Speed change lever
7. Adjusting ring
8. Graduation
9. Arrow
10. Sleeve
11. Ring
12. Tighten
Model MT070 MT071
Capacities
Steel 10 mm 13 mm
Wood 25 mm 36 mm
Wood screw 5.1 x 63 mm 6 mm x 75 mm
Machine screw 6 mm
No load speed (min-1)High (2) 0 - 1,400
Low (1) 0 - 400
Overall length 201 mm 223 mm
Net weight 1.4 kg 1.7 kg
Rated voltage D.C. 14.4 V D.C. 18 V
Produktspezifikationen
| Marke: | Maktec |
| Kategorie: | Schraubenmaschine |
| Modell: | MT071 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Maktec MT071 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Schraubenmaschine Maktec
30 August 2024
30 August 2024
30 August 2024
30 August 2024
30 August 2024
30 August 2024
30 August 2024
Bedienungsanleitung Schraubenmaschine
- EMOS
- Genesis
- Power Craft
- Kress
- Ozito
- Matrix
- Elu
- Rodcraft
- Güde
- Cleco
- Makita
- Yato
- Porter-Cable
- Hitachi
- Ryobi
Neueste Bedienungsanleitung für -Kategorien-
5 Oktober 2024
5 Oktober 2024
4 Oktober 2024
4 Oktober 2024
2 Oktober 2024
1 Oktober 2024
27 September 2024
24 September 2024
24 September 2024
24 September 2024