Marshall Electronics RS7-HR Bedienungsanleitung


Lies die bedienungsanleitung für Marshall Electronics RS7-HR (2 Seiten) kostenlos online; sie gehört zur Kategorie AV extender. Dieses Handbuch wurde von 19 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 10 Bewertungen. Hast du eine Frage zu Marshall Electronics RS7-HR oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/2
RS7-HR
Installation Guide
HARDWARE OVERVIEW
RS7-HR CONNECTION
1
34 5 6 7
2
1
2
3
4
5
6
7
Power Indicator
Controller Input
Connection refresh
Output Connection
RS232 / RS422 Selector
Firmware Service Port
DC Power Connection
The RS7-HR can be set on a desk top or you can use the included 1RU rack ears to install a rack.
Please note the following:
Before connecting your equipment please select RS232 or RS422 on the back of the unit
Connect your controller to the Input connection on the front of the RS7-HR using a Cat 5/6 cable
On the back of the RS7-HR connect your Cat 5/6 cables from the RS7-HR to each camera (you
may need optional CV620-CABLE-07 Adapters for RS232)
You will now connect power to the RS7-HR, you will see a red indicator light appear on the front
of the unit, now you will push the refresh button once
If you disconnect a camera or add a camera you will need to push the refresh button again
RS232 / RS422 Pin Instructions
VS-PTC-IP
RS7-HR
RS422
RS422
RS422
RS422
RS422
RS422
RS422
Cat 6
RS422
Cat 6
VS-PTC-IP
RS7-HR
RS232 RS232 RS232
CV620-
CABLE-07
CV620-
CABLE-07
RS232 RS232 RS232 RS232


Produktspezifikationen

Marke: Marshall Electronics
Kategorie: AV extender
Modell: RS7-HR

Brauchst du Hilfe?

Wenn Sie Hilfe mit Marshall Electronics RS7-HR benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten