Marshall CV-H20-HF Bedienungsanleitung


Lies die bedienungsanleitung für Marshall CV-H20-HF (3 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 2 Bewertungen. Hast du eine Frage zu Marshall CV-H20-HF oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/3
B r o a d c a s t A / V D i v i s i o n
CV-H20-HF
Compact Weatherproof Camera Housing
with Fan & Heater
The CV-H20-PWR is STRONGLY recommended for use with this product.
Optional Weather Proof Power Supply CV-H20-PWR
User Manual
2
WARNING
Installation on a rainy day may also cause fog around the capsule.
Installation
Installation shall be done by qualified installer only and should conform to all local codes.
Ensuring Strength of Supporting Dome Housing Unit
The unit must be properly and securely mounted to a supporting structure capable of
sustaining the weight of the unit. Recommended use of 3/8” stainless screws x three (3).
Prohibit Changes or Modifications of Equipment
You are cautioned that any changes or modifications not expressly approved in these
instructions could void your authority to operate this equipment.
Basic Operating Environment Condition
We provide warranty for the products that are installed under normal outdoor -20°C ~ +50°C
conditions. We are unable to provide warranty for the products which are installed indoor
and exposed to constant high temperature over +50°C and over 90% humidity.
Operating temperature and humidity of camera varies from camera to camera. You are
requested to confirm to camera specification with camera manufacturer and housing
specification with us in advance.
i.e. -20°C or below, you are requested to use additional heater and +50°C or above you are
requested to use two blowers and sunshield.
Fasten wires tightly.
Attention: Keep wires away from the Fan / Heater, and do not disturb Fan/Heater’s
performance
CAUTION
4
3. Dimensions
4. Safeguards
72
67
42
21
60
90
72
95
260
1. Read Instructions – All the safety and operating instructions should be read before operating the unit.
2. Retain Instructions – The safety and operating instructions should be retained for future reference.
3. All warnings on the unit and in the operating instructions should be adhered to.
4. Follow Instructions
5. Electrical Connections – Only a qualified electrician should make the electrical connections.
6. Attachments Do not use attachments not recommended by the product manufacturer as they may cause
hazards.
7. Cable Runs – All cable runs must be within permissible distance.
8. Mounting – This unit must be properly and securely mounted to a supporting structure capable of sustaining the
weight of the unit. Accordingly:
a. The installation should be made by qualified installer.
b. The installation should be in compliance with local codes.
c. Care should be exercised to select suitable hardware to install the unit, taking into account both the
composition of the mounting surface and the weight of the unit. Be sure to periodically examine the unit and
the supporting structure to make sure that the integrity of the installation is intact. Failure to comply with the
foregoing could result in the unit separating from the support structure and falling, with resultant damages or
injury to anyone or anything struck by the falling unit.


Produktspezifikationen

Marke: Marshall
Kategorie: Nicht kategorisiert
Modell: CV-H20-HF

Brauchst du Hilfe?

Wenn Sie Hilfe mit Marshall CV-H20-HF benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten