Martin MC -1 Bedienungsanleitung


Lies die bedienungsanleitung für Martin MC -1 (10 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 25 Personen als hilfreich bewertet und erhielt im Schnitt 4.8 Sterne aus 13 Bewertungen. Hast du eine Frage zu Martin MC -1 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/10
MC-1
user manual
I
NTRODUCTION
The MC-1 is a remote-control device that provides
basic sound-activated operation of compatible Martin
fixtures. This user manual describes the features
programmed in firmware version 1.1.
SAFETY PRECAUTIONS
The MC-1 is not for household use. For safe operation,
read this manual before use and follow the safety
precautions listed below. If you have questions about
how to operate the controller safely, please contact
your Martin distributor or dealer.
Disconnect the fixture from AC power when not in use.
Always ground (earth) the fixture electrically.
Use only a source of AC power that complies with
local building and electrical codes and has both
overload and ground-fault protection.
Refer all service to a qualified technician.
Do not expose the device to rain or moisture.
Do not open the device or remove any part; there are
no user-serviceable parts inside.
P/N 35000078, Rev. C. ©1999, 2000 Martin Professional A/S, Denmark.
3
UNPACKING
The MC-1 comes with:
1.5-meter IEC power cable
5-meter 3-pin XLR data cable
3-pin male XLR termination plug
user manual


Produktspezifikationen

Marke: Martin
Kategorie: Nicht kategorisiert
Modell: MC -1

Brauchst du Hilfe?

Wenn Sie Hilfe mit Martin MC -1 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten