MB Quart JC2-169SB Bedienungsanleitung


Lies die bedienungsanleitung für MB Quart JC2-169SB (5 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 1.5 Bewertungen. Hast du eine Frage zu MB Quart JC2-169SB oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/5
Installation Instructions
Model:
2024+ Jeep JL (Wrangler) & JT (Gladiator)
Description:
Rear Speaker Kit
Part Number:
JC2-169SB
Assembly Time:
120 Minutes (2 Hours)
installations to avoid damaging the vehicles electrical system. Before you begin, read through
these instructions and check that all parts are present.
This installation may require specials skills and tools to complete, it may be necessary to seek
a trained installation technician to complete this installation. Please note that MB Quart cannot
assume any responsibility for damage resulting from incorrect installation.
No. Component Name Qty
1 6x9 Coaxial Speakers 2
2 Speaker Grills 2
3 2Harness Adapter
4 6x9 Cutting Template 1
1 5mm Allen Bit
2 T15 & T20 Torx Bit
3 Rotary Cutting Tool (i.e. Dremel)
4 Marker
Parts List
Tools Required
Page 1 of 5
Page 2 of 5
Rear Speaker Installation
● Remove (4) 5mm Allen bolts to
remove the OEM Grill. Disconnect
the map light harness.
● Remove and disconnect (5) T30
Torx screws from the port and
(5) T20 Torx screws from both
speakers.
● Place included cutting template
over speaker holes, Mark the
outer edge of the 6x9 shape.
NOTE
DO NOT MARK around the
template location holes.
Page 3 of 5
Rear Speaker Installation
● Remove 6x9 cutting template to
show cut lines. Using a rotary
cutting tool, cut along the marker
lines leaving a hole similar to the
picture on the right.
NOTE
BE VERY CAREFUL not to cut
the OEM wiring as this will be
re-used for the 6x9 speaker and
map lights.
● Remove the Map light from each
OEM grill. Attach the map light to
the back of the new grill using the
T15 OEM screws that held it on to
the OEM panel.
● Stick provided foam pads in these
two locations helping to seal the
rear sound wave of the speaker
into the soundbar and connect
the speaker harness included in
the kit to smaller white connector.


Produktspezifikationen

Marke: MB Quart
Kategorie: Nicht kategorisiert
Modell: JC2-169SB

Brauchst du Hilfe?

Wenn Sie Hilfe mit MB Quart JC2-169SB benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten