Megger PAT4DV3 Bedienungsanleitung
Lies die bedienungsanleitung für Megger PAT4DV3 (51 Seiten) kostenlos online; sie gehört zur Kategorie Messung. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 2 Bewertungen. Hast du eine Frage zu Megger PAT4DV3 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/51
User Guide
M
PAT4DV/3 & 4DVF/3
Portable Appliance Testers
2
SAFETY
Symbols used on the instrument.
Caution: Refer to accompanying notes Risk of electric shock.
Equipment complies with relevant EU Directive
SAFETY WARNINGS
• Safety Warnings and Precautions must be read and understood before the instrument is used. They must be observed during use.
• For safety, PAT4 must be properly earthed. Only use a supply socket that has a protective earth contact. If there is any doubt as to
the effectiveness of the supply socket earth, connect a known good earth to the earthing point on the PAT4 front panel.
• Test leads, probes and crocodile clips must be in good order, clean and with no broken or cracked insulation. The flash test probe must
be held behind the handguard, and only be connected to the PAT4 for the duration of the test.
• For safety, tests are performed in the correct order. If an asset (appliance) fails a test, PAT4 will fail the asset and exit the test sequence.
The fault causing the failure must be corrected before the appliance is re-tested.
• During testing, ensure that no hazard will exist if the asset operates as a result of normal running, or of a fault condition.
• Assets should not be routinely flash tested.
• Where assets have to be flash tested, see ‘Flash Testing – Warnings’ on page 11.
• When performing an Insulation test the asset must not be touched.
• Only perform an Operation test after an Earth Bond Test (Class 1 only) and Insulation Test (Class 1 or Class 2) have been verified.
• The instrument should not be used if any part of it is damaged.
• Replacement fuses must be of the correct type and rating. See ‘Fuses’ section.
NOTE: THE INSTRUMENT MUST ONLY BE USED BY SUITABLY TRAINED AND COMPETENT PERSON
Produktspezifikationen
| Marke: | Megger |
| Kategorie: | Messung |
| Modell: | PAT4DV3 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Megger PAT4DV3 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Messung Megger
24 August 2025
9 August 2025
8 August 2025
8 August 2025
8 August 2025
8 August 2025
8 August 2025
7 August 2025
8 Juni 2025
7 Juni 2025
Bedienungsanleitung Messung
- Extron
- Vonroc
- Joy-it
- CEM
- Powerfix
- TFA Dostmann
- Kyoritsu
- Werma
- Bresser
- CIRCUTOR
- Victron Energy
- Oricom
- SRS
- Eizo
- BENNING
Neueste Bedienungsanleitung für -Kategorien-
24 August 2025
24 August 2025
24 August 2025
24 August 2025
24 August 2025
24 August 2025
24 August 2025
24 August 2025
22 August 2025
21 August 2025