Memphis Audio CANAMX310SE Bedienungsanleitung
Memphis Audio
Nicht kategorisiert
CANAMX310SE
Lies die bedienungsanleitung für Memphis Audio CANAMX310SE (5 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 16 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 8.5 Bewertungen. Hast du eine Frage zu Memphis Audio CANAMX310SE oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/5
MXA
CANAM MAVERICK X3
FITS 2017 AND NEWER CANAM MAVERICK X3 MODELS
CANAMX310SE // OEM DIRECT FIT POWERED SUBWOOFER ENCLOSURE
CANAMX310SE
INSTALLATION INSTRUCTIONS
STEP 2 & 3 PHOTOS
STEP 4
WARNING
These instructions are designed to be used on 2017 and newer CanAm Maverick X3 Models. This subwoofer enclosure is designed specifically to work
with these types of machines. If you have a different year or model machine, check with your authorized Memphis Audio dealer or contact Memphis
Audio customer service at 800-489-2300 prior to attempting installation. These kits are not designed to be used with any other model or year vehicle.
Attempting to install these speakers on any other vehicle may result in permanent damage to your vehicle.
This Memphis powered subwoofer enclosure is designed to fit underneith either the driver or passenger seat.
CANAMX310SE
STEP 1
Remove the seat you would like to install the subwoofer underneath.
STEP 2
Place the enclosure as shown in the picture. Be sure to attach the 2 metal brackets at the rear of the enclosure before placing into the
vehicle. These brackets will then go around the threaded bolts that hold the rear of the seat
STEP 3
Use the provided washers and bolts as shown in the picture to secure the front of the enclosure to the vehicle
STEP 4
Reinstall the seat
• The RED wire should be connected directly to the battery’s positive terminal and fused with a 30A fuse.
• The BLACK wire should be directly connected to the battery’s negative terminal
• The BLUE wire can be connected to the ACC / KEY TURN ON located on the buss bar of any vehicle.
• Connect the RCA inputs to the signal source of your choice.
• Turn the unit on and check to make sure everything works. Set the gain using the gain pot that is attached to the ORANGE/GRAY wires.
Set the gain to the bass level desired.
• The included EBC can be connected and mounted to a desired location to allow easy trim adjustment of the bass level after the gain
has been set.
• Replace all the parts and screws that have been removed to return the vehicle back to its completed assembly state.
MEMPHIS AUDIO DIRECT FIT OEM POWERSPORTS SPEAKERS
WIRING INSTRUCTIONS
Wire Harness
Produktspezifikationen
| Marke: | Memphis Audio |
| Kategorie: | Nicht kategorisiert |
| Modell: | CANAMX310SE |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Memphis Audio CANAMX310SE benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Memphis Audio
20 Juni 2025
19 Juni 2025
4 September 2024
4 September 2024
4 September 2024
4 September 2024
4 September 2024
4 September 2024
4 September 2024
4 September 2024
Bedienungsanleitung Nicht kategorisiert
- Deflecto
- BT
- Blue Sky
- Match
- Pointer
- Waterpik
- Ascom
- Plus More
- AXITEC
- Rose
- Four Hands
- Nils Fun
- Lund
- Amfra
- VintageView
Neueste Bedienungsanleitung für -Kategorien-
7 August 2025
7 August 2025
7 August 2025
7 August 2025
7 August 2025
7 August 2025
7 August 2025
7 August 2025
7 August 2025
7 August 2025