Metra 95-3016G Bedienungsanleitung


Lies die bedienungsanleitung für Metra 95-3016G (4 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 2 Bewertungen. Hast du eine Frage zu Metra 95-3016G oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/4
METRA. The Worlds best kits.
metraonline.com
© COPYRIGHT 2015 METRA ELECTRONICS CORPORATION
REV. 6/23/2015 INST95-3016G
CAUTION: Metra recommends disconnecting the negative battery
terminal before beginning any installation, unless the vehicle
manufacturer recommends against so. Please check with your
local Dealership for more information. All accessories, switches,
must be connected before reconnecting the battery or cycling
the ignition. Also, do not remove the factory radio with the key
in the on position, or the vehicle running. It would be best to
remove the key from the ignition and then wait a few seconds
before removing the factory radio.
Installation instructions for part 95-3016G
• ISODoubleDINradioprovision
• Painted gunmetal gray
•A) Radio trim panel B) Radio • brackets C) (4)• #8 3/8”x Phillips pan-head screws
KIT FEATURES
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: •GMOS-LAN-09 LC-GMRC-LAN-09• •AX-LCD
AntennaAdapter:•40-EU55
• Cutting tool•Panelremoval tool 
• Phillips screwdriver•Socket wrench
TOOLS REQUIRED
A B
C
Dash Disassembly................................................. 2
Kit Preparation....................................................... 2
Kit Assembly
ISODoubleDINradioprovision............................. 3
Table of Contents
Chevy Colorado, GMC Canyon 2015-up
(Sub-dash modifications required)
95-3016G
95-3016G
2
Dash Disassembly
1. Unclipandremovethetrimpanel
surroundingtheradio/climate
controlpanel.(FigureA)
2. Remove(4)9/32”screwssecuring
theradio/climatecontrolpanel.
(FigureB)
3. Remove(2)9/32”screwssecuring
theCDplayerthenunplugand
removetheplayer.
4. Unclipandslideoutthefactory
tunermodulethenunplugand
removeit.
5. Unclipandremovetheclimate
controlsfromthefactory
trimpanel.
6. Unclipandremovetheclimate
controlventsfromthefactory
trimpanel.
Continue to kit preparation
Kit Preparation
1. Cutandremovethespecified
areasinthesubdash.(FigureA)
Continue to kit assembly
Removeshadedarea
(Figure A)
(Figure B) (Figure A)
95-3016G
3
Kit Assembly
(Figure A) (Figure B)
Double DIN radio provision
1. Attach the radio brackets to the
radio trim panel with (4) of the
supplied #8 3/8 x Phillips screws.
(FigureA)
2. Slidetheradiointothebrackettrim
panelassemblyandsecurewith
thescrewssuppliedwiththeradio.
(Figure B)
3. Cliptheclimatecontrolsintothe
radiotrimpanelassembly.
4. Cliptheclimatecontrolventsinto
theradiotrimpanelassembly.
5. Locatethefactorywiringharness
andantennapluginthedash.
Metrarecommendsusingthe
propermatingadaptersfromMetra
and/orAXXESS.
6. Reassemblethedashinthe
reverseorderofdisassembly.


Produktspezifikationen

Marke: Metra
Kategorie: Nicht kategorisiert
Modell: 95-3016G

Brauchst du Hilfe?

Wenn Sie Hilfe mit Metra 95-3016G benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten