Metra 95-3312G Bedienungsanleitung

Metra Auto Kit 95-3312G

Lies die bedienungsanleitung für Metra 95-3312G (8 Seiten) kostenlos online; sie gehört zur Kategorie Auto Kit. Dieses Handbuch wurde von 39 Personen als hilfreich bewertet und erhielt im Schnitt 3.5 Sterne aus 20 Bewertungen. Hast du eine Frage zu Metra 95-3312G oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/8
APPLICATIONS
METRA. The World’s best kits.metraonline.com1-800-221-0932 © COPYRIGHT 2014 METRA ELECTRONICS CORPORATION
REV. 11/25/2014 INST95-3312G
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
Installation Instructions for 95-3312G
• Double DIN radio provision
Painted dark gray
A) Radio trim panel • B) Brackets • C) (4) Panel Clips
KIT FEATURES
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70-1858
Antenna Adapter: • 40-GM10
• Panel removal tool • Phillips screwdriver
• Socket wrench
TOOLS REQUIRED
A B C
Dash Disassembly
Pontiac Firebird 1993-2002 ................................... 2
Kit Assembly
Double DIN radio provision ................................... 3
Table of Contents
95-3312G
Dash Disassembly
1. Unclip the radio trim bezel.
Remove (4) 7mm hex-head screws
securing the factory radio and
disconnect the wiring. (Figure A)
2. Move the climate controls out of
the way and cut the plastic shelf
between the radio opening and
the factory climate controls.
Continue to kit assembly
(Figure A)
95-3312G
Kit Assembly
(Figure A) (Figure B)
Double DIN radio provision
1. Attach the four included panel clips
to the radio housing. (Figure A)
2. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the unit for proper operation.
3. Attach the radio to the brackets
with the screws supplied with the
radio and mount into the dash
opening. (Figure B)
4. Snap the radio trim panel over the
radio/bracket assembly.


Produktspezifikationen

Marke: Metra
Kategorie: Auto Kit
Modell: 95-3312G

Brauchst du Hilfe?

Wenn Sie Hilfe mit Metra 95-3312G benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten