Metra 95-6506B Bedienungsanleitung
Metra
Nicht kategorisiert
95-6506B
Lies die bedienungsanleitung für Metra 95-6506B (5 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 20 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 10.5 Bewertungen. Hast du eine Frage zu Metra 95-6506B oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/5

CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
The World’s best kits.MetraOnline.com © COPYRIGHT 2017 METRA ELECTRONICS CORPORATION REV.8/8/17 INST95-6506B
I N S TA L L A T I O N I N S T R U C T I O N S
95-6506B
KIT FEATURES
• ISO DDIN radio provision
• Painted matte black to match the factory appearance
KIT COMPONENTS
• A) Radio brackets
TOOLS REQUIRED
• Phillips screwdriver • Socket wrench
• Small flat blade screwdriver • Cutting tool
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Preparation .......................................................3
Kit Assembly ..........................................................3
WIRING & ANTENNA CONNECTIONS
(sold separately)
Wiring Harness: CHTO-02 amplified interface
• 70-6506 amplified bypass harness
Antenna Adapter: 40-CR10
A
Chrysler Pacifica 2004-2008

1.800.221.0932
|
MetraOnline.com
DASH DISASSEMBLY
2
1. Loosen (1) T-15 Torx screw from the front
side of the shift knob and pull up to
remove. (Figure A)
Note:
For models equipped without a
release lever on the shift knob, just turn
counter-clockwise to remove.
2. Unsnap the floor console trim around
the shifter. Unplug the harness to
console trim and remove the trim.
(Figure B)
3. Unsnap and remove the ignition
key trimring.
(Figure B)
P
R
N
D
AUTOSTICK
P
R
N
D
AUTOSTICK
(Figure A) (Figure C)
4. Unsnap and remove the dash trim
panels from each side of the radio/
climate controls. (Figure C)
5. Remove (4) Phillips screws to
remove the radio.
Continue to Kit Preparation

REV. 8/8/2017 INST95-6506B 3
KIT PREPARATION KIT ASSEMBLY
1. Cut and remove the sub-dash to allow
clearance for the aftermarket radio.
(Figure A)
Continue to Kit Assembly
ISO DDIN radio provision
1. Attach the
radio brackets
to the radio
using the screws supplied with the radio.
(Figure A)
2. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio. Metra recommends using the
proper mating adapter from Metra.
Test the radio for proper operation.
3. Secure the completed assembly into the
dash using the factory screws.
4. Reassemble the dash in reverse order
of disassembly.
(Figure A) (Figure A)
Remove shaded area
Produktspezifikationen
Marke: | Metra |
Kategorie: | Nicht kategorisiert |
Modell: | 95-6506B |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Metra 95-6506B benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Metra
15 Juli 2025
5 Juli 2025
5 Juli 2025
5 Juli 2025
5 Juli 2025
5 Juli 2025
1 Juli 2025
27 Juni 2025
8 Juni 2025
8 Juni 2025
Bedienungsanleitung Nicht kategorisiert
- Zelmer
- ThinkFun
- Friedland
- Aqua Marina
- Lifespan
- Chord
- Texas Instruments
- Native Instruments
- Hameg
- Schleich
- Switel
- Varytec
- Arthur Martin
- Buchla & TipTop Audio
- Fein
Neueste Bedienungsanleitung für -Kategorien-
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025