Metra 95-7331 Bedienungsanleitung
Metra
Nicht kategorisiert
95-7331
Lies die bedienungsanleitung für Metra 95-7331 (4 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 8 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 4.5 Bewertungen. Hast du eine Frage zu Metra 95-7331 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/4
METRA. The World’s best kits.™metraonline.com © COPYRIGHT 2004-2015 METRA ELECTRONICS CORPORATION
REV. 11/6/2015 INST95-7331
Installation instructions for part 95-7331
CAUTION!
Metra recommends disconnecting the negative bat
-
tery terminal before beginning any installation, unless the vehicle
manufacturer recommends against so. Please check with your local
Dealership for more information. All accessories, switches, climate
controls panels, and especially air bag indicator lights must be con-
nected before reconnecting the battery or cycling the ignition. Also,
do not remove the factory radio with the key in the on position, or the
vehicle running. It would be best to remove the key from the ignition
and then wait a few seconds before removing the factory radio.
• ISO DDIN radio provision
• A) Radio housing • B) Radio brackets
KIT FEATURES
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70-1004 • 70-7303 (2009 model only)
Antenna Adapter: • 40-KI10
• Panel removal tool • Phillips screwdriver • 10mm socket wrench
TOOLS REQUIRED
Kia Amanti 2007-2009
95-7331
A B
Dash Disassembly ..............................................2-3
Kit Assembly
– ISO DDIN radio provision ...................................... 4
Table of Contents
95-7331
2
1. Unclip the top half of the shift knob
and remove the “C” clip securing
the shifter. Pull up on the shifter to
remove. (Figure A)
2. Unclip and remove the panel
surrounding the shifter. (Figure B)
3. Unclip and remove the top half of
center console, including the cup
holders. (Figure C)
4. Open the center console and
remove the screw cover located in
the bottom.
5. Remove (2) 10mm bolts securing
the compartment, and then unclip
and remove the compartment.
(Figure D)
Continued on the next page
Dash Disassembly
(Figure B) (Figure D)
123
(Figure A) (Figure C)
95-7331
Dash Disassembly
(Figure F) (Figure H)
6. Unclip the rear trim panel from the center console, including
the a/c vents. Unplug and remove the rear trim panel. (Figure E)
7. Remove (1) Phillips screw from each side at the rear of the
center console. (Figure E)
8. Unclip the side panels from the front of the center console.
(Figure F)
Note: It is not necessary to remove these panels.
9. Remove (4) Phillips screws securing the center console, and
then lift and slide the center console back out of the way.
(Figure G)
Note: You do not have to take the center console all the way out.
10. Remove (1) Phillips screw from each side panel, and then
unclip and remove the panels. (Figure H)
11. Remove (4) Phillips screws securing the radio, and then
unplug and remove the radio.
12. Unclip and remove the switches and/or switch covers along
the top of the factory radio.
Note: Retain the switches and/or covers to be reinstalled in
the radio housing.
Continue to kit assembly
(Figure E) (Figure G)
3
Produktspezifikationen
| Marke: | Metra |
| Kategorie: | Nicht kategorisiert |
| Modell: | 95-7331 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Metra 95-7331 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Metra
15 Juli 2025
5 Juli 2025
5 Juli 2025
5 Juli 2025
5 Juli 2025
5 Juli 2025
1 Juli 2025
27 Juni 2025
8 Juni 2025
8 Juni 2025
Bedienungsanleitung Nicht kategorisiert
- KMA Machines
- Waterbird
- Virax
- Clingo
- Hozelock
- Ultimate
- Rosco
- Statron
- Steelton
- EVE
- 4smarts
- Black Box
- Orava
- Tamiya
- Landmann
Neueste Bedienungsanleitung für -Kategorien-
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025