Metra 99-6000 Bedienungsanleitung

Metra Kfz-Bausatz 99-6000

Lies die bedienungsanleitung für Metra 99-6000 (2 Seiten) kostenlos online; sie gehört zur Kategorie Kfz-Bausatz. Dieses Handbuch wurde von 47 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 24 Bewertungen. Hast du eine Frage zu Metra 99-6000 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/2
99-6000
INSTALLATION
INSTRUCTIONS
KIT COMPONENTS
TOOLS REQUIRED
Cutting tool
Panel removal tool
Phillips screwdriver
KIT FEATURES
Pocket
provisions
Radio Housing
34
Locate the factory wiring harness in the
dash. Metra recommends using the
proper mating adaptor and making
connections as shown. (Isolate and
individually tape off the ends of any
unused wires to prevent electrical short
circuit).
Re-connect the battery terminal and test the unit
for proper operation. Mount the head unit/kit
assembly to the sub-dash with those screws
previously removed in step #1.
A
B
C
D
A) Strip wire ends back ½"
B) Twist ends together
C) Solder
D) Tape
DIN HEAD UNITS: Slide the DIN cage into the kit and secure by bending the metal locking
tabs down. Slide the aftermarket head unit into the cage until secure.
ALL VEHICLES
2
3
APPLICATIONS
CHRYSLER / DODGE / EAGLE / JEEP
PLYMOUTH VEHICLES 1974-00
(SEE INSIDE FOR SPECIFIC APPLICATIONS)
1-800-221-0932 www.metraonline.com
© COPYRIGHT 2001 METRA ELECTRONICS CORPORATION
rev. 230701


Produktspezifikationen

Marke: Metra
Kategorie: Kfz-Bausatz
Modell: 99-6000

Brauchst du Hilfe?

Wenn Sie Hilfe mit Metra 99-6000 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten