Metra 99-7872 Bedienungsanleitung

Metra Kfz-Bausatz 99-7872

Lies die bedienungsanleitung für Metra 99-7872 (12 Seiten) kostenlos online; sie gehört zur Kategorie Kfz-Bausatz. Dieses Handbuch wurde von 17 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 9 Bewertungen. Hast du eine Frage zu Metra 99-7872 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/12
INSTALLATION INSTRUCTIONS FOR PART 99-7872
99-7872
APPLICATIONS
Honda Fit 2007-2008
KIT FEATURES
• DIN Radio Provision with Pocket
ISO Mount Radio Provision with Pocket
Double DIN Radio Provision
Stacked ISO Mount Units Provision
Painted To Match Factory Dash
99-7872=Gray
A) Radio Housing B) ISO Brackets C) ISO Trim Plate D) Double DIN Brackets
E) Double DIN Trim Plate F) Pocket
KIT COMPONENTS
A
Small Flat Blade Screwdriver/ Panel Removal Tool
Phillips Screwdriver Socket Set
1-800-221-0932
© COPYRIGHT 2004-2009 METRA ELECTRONICS CORPORATION
www.metraonline.com
BD
E
C
F
WIRING AND ANTENNA CONNECTIONS
(Sold Separately)
Harness:
• 70-1722 - Honda harness 2006-up
Antenna Adapter:
• 40-HD10 - Honda antenna adapter
2005-up
TOOLS REQUIRED:
Dash Disassembly
-
Honda Fit 2007-2008 ...........................
. . . . 1,2
Kit Assembly
- Kit Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
- DIN Radio Provision with Pocket . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
- ISO Mount Radio Provision with Pocket. . . . . . . . . . . . . . . . . . . . . . . . 5
- . . . . . . . . . . . . . . . . . . . . . . .Double DIN Radio Provision . . . . . . . . . 6
- Stacked ISO Mount Units Provision . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Final Assembly . 8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TABLE OF CONTENTS
99-7872
*Note:
Refer also to the instructions included with the aftermarket radio.
K
NOWLEDGE IS
P
OWER
Enhanc our installation and fabrication skille y s by
enrolling in the most recognize an espected d r d
mobile electronics sch ol in our industro y.
Log onto www.installerinstitute.co cam or ll
800-354-6782 for more informatio an take n d
steps towar be ter tomorrod a t w.
99-7872 DASH DISASSEMBLY
HONDA FIT 2007-2008
A
B
C
1
1
Unclip the (3) a/c control cables
behind glove box. (
Figure A)
Disconnect the negative battery
terminal to prevent an accidental
short circuit.
3
Squeeze sides of glove box then pull
out and let hang to access cables
behind it.
2
Remove (2) 8 MM bolts securing
center panel then unclip, unplug
and r ve entiremo e assembly
including climate controls. (
Figure C)
NOTE:
These bolts are accessed
from underneath the climate controls.
Figure C shows assembly already
removed to show bolt location.
5
Remove (1) Phillips screw from the
panel on the bottom of the a/c
controls then unclip and remove
the panel. (
Figure B)
4
Continue to kit assembly.


Produktspezifikationen

Marke: Metra
Kategorie: Kfz-Bausatz
Modell: 99-7872

Brauchst du Hilfe?

Wenn Sie Hilfe mit Metra 99-7872 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten