Metra 99-8274 Bedienungsanleitung


Lies die bedienungsanleitung für Metra 99-8274 (8 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 4 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 2.5 Bewertungen. Hast du eine Frage zu Metra 99-8274 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/8
Metra. The World’s Best Kits.
®
MetraOnline.com © COPYRIGHT 2024 METRA ELECTRONICS CORPORATION REV. 11/12/24 INST99-8274
I N S TA L L AT I O N I N S T R U C T I O N S
99-8274
Attention! With the key out of the ignition,
disconnect the negative battery terminal
before installing this product. Ensure that all
installation connections are secure before
KIT FEATURES
KIT COMPONENTS
• A) Radio housing • B) ISO DIN brackets • C) ISO DIN trim plate • D) ISO DDIN brackets • E) ISO DDIN trim plate • F) Pocket • G) Radio housing brackets
• H)
Hazard button harness (not shown)
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• Cutting tool • 10mm socket wrench
TABLE OF CONTENTS
Dash Disassembly...................................................2
Kit Preparation....................................................3-4
Kit Assembly
–DIN radio provision with pocket.........................5
–ISO DIN radio provision with pocket...................6
–ISO DDIN radio provision......................................7
WIRING & ANTENNA CONNECTIONS
(sold separately)
Wiring Harness: 70-1761
See AXXESSINTERFACES.COM for all interface
solutions.
Antenna Adapter: Not required
A B C
F
G
D E
Toyota Highlander (with factory NAV) 2008-2012
Visit for more detailed information about the product and up-to-date vehicle MetraOnline.com
specific applications
DIN radio provision with pocket
ISO DIN radio provision with pocket
ISO DDIN radio provision
Hazard button with passenger airbag and security light assembly included.
Painted to match factory dash: 99-8274B = Black, 99-8274BR = Brown
386.257.1187
|
MetraOnline.com
2
1. Unclip and remove the a/c vent panel.
(Figure A)
2. Unclip, unplug, and remove the climate
control panel. (Figure B)
3. Remove (4) 10mm bolts securing the
radio. Slide the radio out, then unplug
and remove the radio/display assembly.
(Figure C)
Note: Non-NAV radio shown in dash
disassembly drawings
Continue to Kit Preparation
DASH DISASSEMBLY
(Figure A) (Figure B) (Figure C)
REV. 11/12/2024 INST99-8274
3
From the factory radio/display assembly:
1. Remove (2) Phillips screws securing the
display panel, then remove. (Figure A)
2. Remove (4) panel clips. (Figure B)
Continued on the next page
KIT PREPARATION
ONE
SCREW
ON EACH
SIDE
SIDE VIEW
CLOCK/DISPLAY-
RADIO ASSEMBLY
REMOVE
4 PANEL CLIPS
(Figure A)
(Figure B)


Produktspezifikationen

Marke: Metra
Kategorie: Nicht kategorisiert
Modell: 99-8274

Brauchst du Hilfe?

Wenn Sie Hilfe mit Metra 99-8274 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten