Metra JP-1020 Bedienungsanleitung
Metra
Lautsprecher
JP-1020
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Metra JP-1020 (12 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war für 2 Personen hilfreich und wurde von 1.5 Benutzern mit durchschnittlich 4.8 Sternen bewertet
Seite 1/12
Metra. The World’s Best Kits.
®
MetraOnline.com © COPYRIGHT 2024 METRA ELECTRONICS CORPORATION REV. 7/8/24 INSTJP-1020
INSTALLATION INSTRUCTIONS
JP-1020
Attention! Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
KIT FEATURES
• Driver and passenger specific lower dash grilles
• Cut templates and hardware
• ABS injection molded, silver painted surround
• Metal stamped grille insert
• Use with OE or pair with JP-1014 speaker pods
• 1 Year warranty from defects
KIT COMPONENTS
• A) Template (left & right) • B) Cut-in grilles (left & right) • C) Backing plates (left & right) • D) Installation hardware
TOOLS REQUIRED
• Panel removal tool
• Phillips screwdriver
• 7mm & 8mm socket
• 2.5mm Allen key
• 1/4" Drill bit
• Utility knife
• Oscillating saw or
other cutting device
TABLE OF CONTENTS
Dash Disassembly .............................................. 2-3
Driver Side Disassembly ................................... 4
Passenger Side Disassembly ............................5
Cutting Instructions
Driver Side Cutting ........................................6-8
Passenger Side Cutting................................ 9-11
Jeep Wrangler (JL) 2024-Up
Jeep Gladiator (JT) 2024-Up
Lower Dash Speaker Grille Kit
Visit MetraOnline.com for more detailed information about the
product and up-to-date vehicle specific applications
A B
C D
386.257.1187
|
MetraOnline.com
2
Figure A: Remove (4) Phillips screws from the tray above the radio. Figure B: Remove the top trim piece with the panel tool.
1. Remove (4) Phillips screws from the
tray above the radio. (Figure A)
2. Remove top trim piece with the panel
tool. Disconnect harness if present.
(Figure B)
3. With the tray removed, remove the (2)
exposed Phillips screws. (Figure C)
4. With the top trim removed, remove the
(2) Phillips screws at the base of the
passenger A-pillar. (Figure D)
DASH DISASSEMBLY
Figure C: With the tray removed, remove the (2) exposed Phillips screws.
NOTE: The Dash Disassembly photos are
highlighted in yellow. Locations of screws to
be removed are approximate.
Figure D: With the top trim removed, remove the (2) Phillips screws at the
base of the passenger A-pillar.
Produktspezifikationen
| Marke: | Metra |
| Kategorie: | Lautsprecher |
| Modell: | JP-1020 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Metra JP-1020 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Lautsprecher Metra
8 Juni 2025
8 Juni 2025
12 September 2024
12 September 2024
Bedienungsanleitung Lautsprecher
- Lautsprecher JB Systems
- Lautsprecher Porter-Cable
- Lautsprecher Bowers And Wilkins
- Lautsprecher AKG
- Lautsprecher Finlux
- Lautsprecher OSD Audio
- Lautsprecher Swisstone
- Lautsprecher Edwards Signaling
- Lautsprecher Manhattan
- Lautsprecher TCL
- Lautsprecher ECG
- Lautsprecher Rockford Fosgate
- Lautsprecher Heitech
- Lautsprecher Vivax
- Lautsprecher GPO
Neueste Bedienungsanleitung für -Kategorien-
8 Juni 2025
8 Juni 2025
8 Juni 2025
8 Juni 2025
7 Juni 2025
7 Juni 2025
7 Juni 2025