Mettler Toledo XS Bedienungsanleitung

Lies die bedienungsanleitung für Mettler Toledo XS (2 Seiten) kostenlos online; sie gehört zur Kategorie Waage. Dieses Handbuch wurde von 39 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 20 Bewertungen. Hast du eine Frage zu Mettler Toledo XS oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Weighing Setup: For more precision / shorter stability time

On

Off

Example

On

Off

G

H

B

CCC

D

XP Balance

I

XS Balance

Short Operating Instructions

For further information, please refer to the operators Manual

METTLER TOLEDO

XP / XS Analytical- and Precision Balances

Basic Functions:

Switching on

and off

Display

1. Switch on display:

Press the «On/Off»

key briefly. The display

performs a test and is

then ready to weigh.

2. Switch off Display;

Press and hold the

«On/Off» key until the

message “OFF” ap-

pears in the display.

The display then fades

and the balance is

switched off.

User Profile: *only XP

Choose

User Profile

This key can be used to

call up the desired user

profile. Different settings

can be stored in a user

profile.

Zero

Display

Zeroing: Press the

«G» to set a new

zero point.

Always use the «G»

before you start the

weighing procedure.

Tare

Display

Taring: If you work with

a Tare container, first

zero the balance. Then

put the Tare container

on the balance and

press «H», to tare

the balance.

Weighing-

Applications

Choose the applica-

tion: If you want to

change the application,

then press the applica-

tion menu button and

choose another ap-

plication.

Levelling, Internal

Adjustment

(Factory setting)

1. Level indicator is built-

in in the device.

2. Level indicator is not

centered.*

3. Release the clamps.*

4. Levelling. After this pro-

cess, lock the clamps

again.*

5. Internal Adjustment

Pressing this function

key triggers a balance

adjustment using the

built-in calibration

weight. This can be

implemented at any

time.

*

depending on balance

Weighing filters:

Weighing mode

1. Choose System-Set-

up

2. Define Weighing pa-

rameters

3. Define the Weighing

mode

Advise:

Solids:

«Universal»

Powder, Liquid:

«Dosing»

Weighing filters:

Environment

1. Choose System-Set-

up

2. Define Weighing pa-

rameters

3. Define Environment

Advise:

Fume cupboard – un-

stable weighing table:

«

Unstable»,

«Very unstable»

Stable Weighing table,

no drafts

«Standard», «Stable»

Weighing filters:

Value Release

1. Choose System-Set-

up

2. Define Weighing pa-

rameters

3. Define Value Release

Advise:

Highest Precision:

«Very reliable»

Fast Value Release:

«Very fast»,

but less precision

Test:Additional Functions:

Produktspezifikationen