Microchip ATSAMD21E18 Bedienungsanleitung
Microchip
Nicht kategorisiert
ATSAMD21E18
Lies die bedienungsanleitung für Microchip ATSAMD21E18 (44 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 20 Personen als hilfreich bewertet und erhielt im Schnitt 4.8 Sterne aus 10.5 Bewertungen. Hast du eine Frage zu Microchip ATSAMD21E18 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/44
TRAINING MANUAL
Single-slope PWM Implementation using SAM D21 TCC in
a Touch- based Application
AN- 9232
Prerequisites
• Hardware Prerequisites
• Atmel® SAM D21 Xplained Pro Evaluation Kit
• Atmel KitQT1 Xplained Pro
• USB Micro Cable (TypeA/ -B) Micro
• Software Prerequisites
• Atmel Studio 6.2 or higher
• Atmel Software Framework 3.1 .0 or higher7
• Atmel QTouch® Composer 5.3 or higher
• Atmel QTouch Library 5.3 or higher
• Documentation Prerequisites
• Atmel- - - - - - - -42271 Introduction to QTouch Design Parameters using
SAM- - - - -D21 Xplained Pro_Training Manual_AN 7846 Training Manual
• Estimated completion time: 60min.
Introduction
The goal of this hands on is to:-
• Create a Touch proje using QTouch Project Builderct
• Use QTouch Analyzer to test the project
• Implement a PWM signal using the SAM D21 Timer/Counters for Control
peripheral the brightness (TCC) to drive of a LED
• Modify the utton LED brightness in relation to the Touch Delta value of a B
sensor by updating the PWM duty cycle
42327 A 07/−2014
AN- – -9232 Single slope PWM Implementation using SAM D21 TCC in a Touch-based Application: 42327 2014A 07/−
Page 442 of
Table of Contents
Prerequisites .....................................................................................1
Introduction .......................................................................................1
Icon Key Identifiers ...........................................................................3
1. Training Module Architecture .....................................................4
1.1 Atmel Studio Extension (.vsix) ............................................................. 4
1.2 Atmel Training Executable (.exe) ......................................................... 4
2. Introduction ................................................................................5
3. Assignment 1: Create a Touch project using QTouch Project
Builder ........................................................................................6
3.1 Project Creation ................................................................................... 6
3.2 Conclusion ......................................................................................... 18
4. Assignment 2: Use QTouch Analyzer to Test the Project ........ 19
4.1 Connect the Kit to QTouch Analyzer ................................................. 19
4.2 Test the Proximity Effect of the QTouch Application ......................... 23
4.3 Conclusion ......................................................................................... 24
5. Assignment 3: Implement a PWM Signal using the SAM D21
Timer/Counters for Control Application Peripheral (TCC) ........ 25
5.1 Introduction to Timer/Counters for Control Application (TCC) ........... 25
5.2 TCC Peripheral Initialization Using ASF Quick Start Guide. ............. 27
5.3 Conclusion ......................................................................................... 34
6. Assignment 4: Use QTouch Button to Control LED Brightness 35
6.1 Reading and using Button Touch Delta Value ................................... 35
6.2 Using PWM to Control LED Brightness ............................................. 37
6.3 Conclusion ......................................................................................... 41
7. Conclusion ............................................................................... 42
8. Revision History ....................................................................... 43
AN- – -9232 Single slope PWM Implementation using SAM D21 TCC in a Touch-based Application: 42327 2014A 07/−
Page 443 of
Icon Key Identifiers
Delivers contextual information about a specific topic.
Highlights useful tips and techniques.
Highlights objectives to be completed.
Highlights the expected result of an assignment step.
Indicates important information.
Highlights actions to be executed out of the target when
necessary.
Produktspezifikationen
| Marke: | Microchip |
| Kategorie: | Nicht kategorisiert |
| Modell: | ATSAMD21E18 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Microchip ATSAMD21E18 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Microchip
10 Juni 2025
9 Juni 2025
9 Juni 2025
9 Juni 2025
9 Juni 2025
9 Juni 2025
9 Juni 2025
9 Juni 2025
9 Juni 2025
9 Juni 2025
Bedienungsanleitung Nicht kategorisiert
- Sanitas
- Dynaudio
- Spanninga
- ADATA
- Bigben
- AddLiving
- Proteca
- Tormatic
- Integra
- Clearblue
- Crystal Quest
- Bionaire
- Peach
- Domyos
- Theben
Neueste Bedienungsanleitung für -Kategorien-
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025