Microchip ATTINY814 Bedienungsanleitung


Lies die bedienungsanleitung für Microchip ATTINY814 (596 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 17 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 9 Bewertungen. Hast du eine Frage zu Microchip ATTINY814 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/596
ATtiny417/814/816/817
tinyAVR
®
1-series
Introduction
The ATtiny417/814/816/817 are members of the tinyAVR
®
1-series of microcontrollers, using the AVR
®
processor with
hardware multiplier, running at up to 20 MHz, with 4/8 KB Flash, 256/512 bytes of SRAM, and 128 bytes of EEPROM
in a 14-, 20- and 24-pin package. The tinyAVR
®
1-series uses the latest technologies with a flexible, low-power
architecture, including Event System, accurate analog features, and Core Independent Peripherals (CIPs).Capacitive
touch interfaces with Driven Shield+ and Boost Mode technologies are supported with the integrated Peripheral
Touch Controller (PTC).
Attention:  Automotive products are documented in separate data sheets.
Features
CPU
AVR
®
CPU
Running at up to 20 MHz
Single-cycle I/O access
Two-level interrupt controller
Two-cycle hardware multiplier
Memories
4/8 KB In-system self-programmable Flash memory
128 bytes EEPROM
256/512 bytes SRAM
Write/erase endurance:
Flash 10,000 cycles
EEPROM 100,000 cycles
Data retention:
40 years at 55°C
System
Power-on Reset (POR)
Brown-out Detector (BOD)
Clock options:
16/20 MHz low-power internal RC oscillator
32.768 kHz Ultra Low-Power (ULP) internal RC oscillator
32.768 kHz external crystal oscillator
External clock input
Single-Pin Unified Program and Debug Interface (UPDI)
Three sleep modes:
© 2020 Microchip Technology Inc.
Complete Datasheet
DS40002288A-page 1


Produktspezifikationen

Marke: Microchip
Kategorie: Nicht kategorisiert
Modell: ATTINY814

Brauchst du Hilfe?

Wenn Sie Hilfe mit Microchip ATTINY814 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten