Microchip MIC502 Bedienungsanleitung


Lies die bedienungsanleitung für Microchip MIC502 (16 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 5 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 3 Bewertungen. Hast du eine Frage zu Microchip MIC502 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/16
MIC502
Fan Management IC
Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel +1 (408) 944-0800 • fax + 1 (408) 474-1000 • http://www.micrel.com
October
6, 2014
Revision 3.0
General Description
The MIC502 is a thermal and fan management IC that
supports the features for NLX/ATX power supplies and
other control applications.
Fan speed is determined by an external temperature
sensor, typically a thermistor-resistor divider, and
(optionally) a second signal, such as the NLX “FanC”
signal. The MIC502 produces a low-frequency pulse-width
modulated output for driving an external motor drive
transistor. Low-frequency PWM speed control allows
operation of standard brushless DC fans at low duty-cycle
for reduced acoustic noise and permits the use of a very
small power transistor. The PWM time base is determined
by an external capacitor.
An open-collector overtemperature fault output is asserted
if the primary control input is driven above the normal
control range.
The MIC502 features a low-power sleep mode with a user-
determined threshold. Sleep mode completely turns off the
fan and occurs when the system is asleep or off (both
control inputs very low). A complete shutdown or reset can
also be initiated by external circuitry as desired.
The MIC502 is available as 8-pin plastic DIP and SOIC
packages in the 40°C to +85°C industrial temperature
range.
Datasheets and support documentation are available on
Micrel’s web site at: www.micrel.com
.
Features
Temperature-proportional fan speed control
Low-cost, efficient PWM fan drive
4.5V to 13.2V IC supply range
Controls any voltage fan
Overtemperature detection with fault output
Integrated fan startup timer
Automatic user-specified sleep mode
Supports low-cost NTC/PTC thermistors
8-pin DIP and SOIC packages
Applications
NLX and ATX power supplies
Personal computers
File servers
Telecom and networking hardware
Printers, copiers, and office equipment
Instrumentation
Uninterruptible power supplies
Power amplifiers
Typical Application


Produktspezifikationen

Marke: Microchip
Kategorie: Nicht kategorisiert
Modell: MIC502

Brauchst du Hilfe?

Wenn Sie Hilfe mit Microchip MIC502 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten