Microchip MPF050TL Bedienungsanleitung

Lies die bedienungsanleitung für Microchip MPF050TL (102 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 13 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 5 Bewertungen. Hast du eine Frage zu Microchip MPF050TL oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Data Sheet

© 2024 Microchip Technology Inc. and its subsidiaries

DS00003831E - 1

Overview

This datasheet covers the electrical AC and DC specications for four temperature grades of devices (part

number prexes MPF050, MPF100, MPF200, MPF300, and MPF500). AC and DC electrical characteristics and

parametric values, unless otherwise noted, apply to all temperature grade devices. For example, worst-case

STD speed grade applies to all temperature grade devices and –1 speed grade applies to all temperature grade

devices except Military. In addition, Low-Power (L) devices are equivalent in performance to STD speed grade

devices where oered. Users are expected to close timing using SmartTime for the speed and temperate grade

of the device chosen.

Table 1. PolarFire Minimum and Maximum Juncon Temperatures by Temperature Grade

Temperature GradeMinimum Junction TemperatureMaximum Junction Temperature

Extended Commercial (E)0 °C100 °C

Industrial (I)–40 °C100 °C

Automotive AECQ-100 (T2)–40 °C125 °C

Military (M)–55 °C125 °C

Table 2. PolarFire Speed Grade Opons by Temperature Grade

Temperature GradeStandard Speed Grade–1 Speed Grade

Extended Commercial (E)AvailableAvailable

Industrial (I)AvailableAvailable

Automotive T2 (T2)AvailableAvailable

Military (M)AvailableNot Available

Table 3. PolarFire Package Ball Composion by Temperature Grade

Temperature GradeBall Material CompositionPackage Decoupling Capacitor Solder Paste (FC484, FC784, FC1152)

Extended Commercial (E)RoHSRoHS

Industrial (I)RoHSRoHS

Automotive T2 (T2)RoHSRoHS

Military (M)Lead, TinLead, Tin

PolarFire device programming functions (programming, verify, and digest check) are only allowed over

the Industrial temperature range regardless of the temperature grade of the device selected. Retention

characteristics for each temperature range explicitly describe the retention characteristics for that temperature-

grade device. You cannot, for example, use the retention characteristics at 110 °C and apply them to the

Extended Commercial or Industrial devices with a maximum T

J

of 100 °C. Retention characteristics for Military-

grade devices and Automotive-grade devices at the absolute maximum junction temperature of 125 °C can

be proled using the PolarFire Retention Calculator, which can be obtained by contacting technical support at

microchip.com/support.

PolarFire

®

FPGA

Produktspezifikationen