Microchip PCI11414 Bedienungsanleitung

Lies die bedienungsanleitung für Microchip PCI11414 (36 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 13 Personen als hilfreich bewertet und erhielt im Schnitt 4.0 Sterne aus 4 Bewertungen. Hast du eine Frage zu Microchip PCI11414 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage



2023 Microchip Technology Inc. and its subsidiariesDS50003610A-page 1

1.0INTRODUCTION

The PCI11414 Quick Start Guide provides a visual view of step-by-step procedures used to exercise each peripheral

system available in EVB-PCI11414. The PCI11414 is a PCIe

®

bridge that supports SPI, I

2

C, GPIO, Ethernet, USB (2.0

and 3.1 Gen2), and UART. The versatile nature of this product makes it ideal for embedded systems and industrial appli-

cations.

Detailed information is included in the following sections:

•Section2.0, General Considerations

•Section3.0, Board Setup

•Section4.0, Programming the Board

•Section5.0, Verifying Hardware

2.0GENERAL CONSIDERATIONS

2.1Required References

The PCI11414 implementor should have the following documents on hand:

•EVB-PCI11414 Evaluation Board User’s Guide

•AN5104 MPLab Connect PCI1XXXX Options

2.2Hardware Requirements and Setup

All the hardware devices mentioned in this quick start guide can be acquired using their part numbers from

www.microchipdirect.com. Below is a required device:

•EVB-PCI11414 Evaluation Board

2.3Software Requirements

The following software programs are required for carrying out the procedures in this guide:

•Drivers. Linux

®

Kernel 6.1.0 is used in conjunction with the drivers below to verify the functionality of the

PCI11414. The latest drivers are mainlined into the Linux 6.1.x kernel and can additionally be found on the

PCI11414 product page.

-GP_Driver V1.0.0 or newer

-I

2

C_Driver V1.0.0 or newer

-SPI_Driver V1.0.0 or newer

-UART_Driver V1.0.0 or newer

•SW Packages

-Spi_driver_tools (must be compiled):

-I

2

C tools

-Minicom (built into Linux)

-Pymodslave (can be installed with pip install pyModSlave, which only works through Python 3.9)

-Gmodmaster (can be downloaded from https://sourceforge.net/projects/qmodmaster/)

PCI11414

Linux

®

Quick Start Guide

Produktspezifikationen