Microchip PL485-EK Bedienungsanleitung
Seiten 41 Engels Nicht kategorisiert
Lies die Bedienungsanleitung für Microchip PL485-EK kostenlos online oder lade das PDF herunter. 25 Personen fanden diese Anleitung hilfreich. Frage zu diesem Modell? Stelle eine Frage
PL485-EK
PL485-EK User Guide
Introduction
PL485-EK is an evaluation kit for the PL485. PL485 is a programmable System On Chip (SOC) for narrow-band
Power Line Communication (PLC) from Microchip Technology Inc, able to run any PLC protocol in the frequency
band below 500 kHz. Depending on the running firmware, PL485 is able to support applications not only for basic
connectivity (point to point or point to multi-point connectivity) but also for complex mesh network topologies.
The PL485-EK board has been conceived to communicate in the CENELEC B-Band (95 kHz to 125 kHz) and
complies with the CENELEC EN 50065 standard. It is designed to be directly connected to low voltage DC power
rails and optionally to AC mains by means of an external coupler accessory. Please refer to PLC-AC-Coupler User
Guide for more information about the AC coupler accessory.
Contents
•Welcome letter
• Board:
–One PL485-EK board
• Cable:
–One Micro A/B-type USB cable
Kit contents are protected with anti-static foam. The PL485-EK board is shipped in an anti-static shielding bag.
WARNING
The board must not be subject to high electrostatic discharges. It is recommended to use a grounding
strap or similar ESD protective device when handling the board in hostile ESD environments. Avoid
touching the component pins or any other metallic element on the board.
Features
•PL485-EK board includes a PL485 system on chip, able to run any PLC protocol in the <500 kHz band.
•PL485-EK board implements a coupling circuit optimized for the band 95kHz to 125 kHz, compliant with
CENELEC standard EN50065.
•SWD/JTAG interface for MCU debugging and programming purposes. PL485-EK board includes as well a USB
Embedded Debugger (EDBG) for on-board debugging.
•USB 2.0 full-speed interface
• mikroBUS™ socket connector to interface with other circuits and add-on boards.
•Xplained PRO header connector (master) to interface with other circuits and add-on boards.
•RESET push button, ERASE jumper.
•Voltage monitor circuit on the 5V rail, or alternatively on the 3.3V rail with minor modifications.
•PL485-EK board can be powered from the following sources:
–Micro-B USB connector (J5)
–Micro-B USB connector (J12)
© 2020 Microchip Technology Inc. User GuideDS50002954B-page 1
Produktspezifikationen
| Marke: | Microchip |
| Kategorie: | Nicht kategorisiert |
| Modell: | PL485-EK |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Microchip PL485-EK benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Microchip
Microchip HV9930 Bedienungsanleitung Microchip PIC16F1507 Bedienungsanleitung Microchip PIC32MZ1024EFG144 Bedienungsanleitung Microchip PIC24F32KA301 Bedienungsanleitung Microchip ATMEGA1609 Bedienungsanleitung Microchip EVB-LAN9354 Bedienungsanleitung Microchip mcp4662 Bedienungsanleitung Microchip PIC16F1509 Bedienungsanleitung
Beliebt in Nicht kategorisiert
Microchip SY88149CL Bedienungsanleitung Microchip PIC16F1508 Bedienungsanleitung Microchip UTC2000 Bedienungsanleitung