Microchip SY84113BU Bedienungsanleitung

Lies die bedienungsanleitung für Microchip SY84113BU (10 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 8 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 4.5 Bewertungen. Hast du eine Frage zu Microchip SY84113BU oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

SFP Module Reference Design

SFP_SY84782U_R0

Preliminary

Micrel Inc. • 2180 Fortune Drive • Jose, CA 95131 • USA • tel +1 (408) 9440800 • fax + 1 (408) 4741000 • San --http://www.micrel.com

March 19, 2015

Preliminary

General Description

This evaluation board is a complete SFP module as

dened in the SFP MSA document. The design uses

Micrel’s MIC3003 controller, the 1G DFB/FP laser .25

driver SY84782U, and any of the SY84113U iting lim

amplierA picture of the fully loaded board is shown on .

the next page.

Datasheets and support documentation are available on

Micrel’s web site at: . www.micrel.com

Related Support Documentation

MIC3003 datasheet: Fibre optic module controller

featuring digital diagnostic monitoring interface, as per

SFF-8472/SFF-8432, with internal/external calibration

and full laser control with bias and modulation current

compensation for temperature variations using lookup

tables.

84782U datasheet. SY.

SY84113U datasheet. . .

 MIC3003 software user’s guide.

Features

Compliant with SFP MSA

Allows for easy and fast evaluation of Micrel’s chipset

for low power SFP module

Multi-rate operation up to 1.25Gbps

Single, power supply: 2.5V or 3.3V

Extended temperature range: -40°C to +9 5°C

Transmitter FP/DFP Laser Diode Driver –

Operates from a single 2.5V or 3.3V supply

Modulation current up to 80mA

C be DC or AC coupled to the laser an

Small form factor 3mm x 3mm QFN package

Receiver Limiting Post Amplier –

Wide dierential input range (5mV

PP

1800tomV

PP

)

Wide SD de-assert or LOS assert threshold range

3mV

PP

to 30mV

PP

with 4dB typical electrical hysteresis

Fast SD / LOS assert/de-assert time

Available in a tiny 3mm x 3mm QFN package

Controller

Extensive temperature range

Alarms and warnings interrupt and TXFAULT masks

Capability to support up to four chips on the serial

interface

Integrated digital temperature sensor

Temperature compensation of modulation, bias, and

fault levels via NVRAM lookup tables

User-writeable EEPROM scratchpad

Option to be used with Cisco security chip

Diagnostic monitoring interface per SFF-8472/8432

Space saving 3mmx3mm package available

(MIC3003GFL)

Produktspezifikationen