Midland MicroMobile MXAT05 Bedienungsanleitung

Midland Radio MicroMobile MXAT05

Lies die bedienungsanleitung für Midland MicroMobile MXAT05 (1 Seiten) kostenlos online; sie gehört zur Kategorie Radio. Dieses Handbuch wurde von 24 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 12.5 Bewertungen. Hast du eine Frage zu Midland MicroMobile MXAT05 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/1
5900 Parretta Drive ● KANSAS CITY, MO ● 64120
PHONE: (816) 241-8500 ● FAX: (816) 241-5713
EMAIL: mail@midlandradio.com
WEBSITE: midlandusa.com
Midland Radio Corporation
midlandusa.com
4/26/2023
MXAT04 and MXAT05 Assembly Diagram
1. The MXAT04 and MXAT05 are designed for mounng brackets or surfaces up to 3/4" thick. substanal
2. The MXAT04 and MXAT05 are designed to be installed in a 1/2" hole.
3. Part B, 3/8” spacer, is oponal for mounng brackets or surfaces up to 3/8” thick. Part B, 3/8” spacer,
should be removed for brackets or surfaces more than 3/8” thick.
4. Remove the FME to PL259 adapter on the end of the coaxial cable so the washers and hex nut can be slid
o the coaxial cable. Also remove the 3/8” spacer, Part B, if not being used.
5. Route the coaxial cable from the topside through the mounng hole in the bracket or surface, Part C.
6. Slide the at washer, lock washer and hex nut, Parts D, E and F, back on the coaxial cable in the order
shown.
7. Hold the antenna assembly in posion while ghtening the hex nut, Part F. Maximum torque 35 lb-.
8. Finish roung the coaxial cable through the vehicle to the radio, before reinstalling the FME to PL259
adapter.


Produktspezifikationen

Marke: Midland
Kategorie: Radio
Modell: MicroMobile MXAT05

Brauchst du Hilfe?

Wenn Sie Hilfe mit Midland MicroMobile MXAT05 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten