Mikrotik FiberBox Bedienungsanleitung

Lies die bedienungsanleitung für Mikrotik FiberBox (5 Seiten) kostenlos online; sie gehört zur Kategorie Router. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 2 Bewertungen. Hast du eine Frage zu Mikrotik FiberBox oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

FiberBox

FiberBox ()CRS105-5S-FB



The Fiberbox is an outdoor switch with five SFP ports, ideal for locations where distance is restricting the use of regular ethernet cables. The device is

weatherproof and comes with a hose clamp and zip ties, ready to be installed on high masts and towers.

Safety Warnings

Before you work on any equipment, be aware of the hazards involved with electrical circuitry, and be familiar with standard practices for preventing

accidents.

Ultimate disposal of this product should be handled according to all national laws and regulations.

The Installation of the equipment must comply with local and national electrical codes.

This product is intended to be mounted outdoors on a pole. Please read the mounting instructions carefully before beginning installation. Failure to use the

correct hardware and configuration or to follow the correct procedures could result in a hazardous situation for people and damage to the system.

Use only the power supply and accessories approved by the manufacturer, and which can be found in the original packaging of this product.

Read the installation instructions before connecting the system to the power source.

We cannot guarantee that no accidents or damage will occur due to the improper use of the device. Please use this product with care and operate at your

own risk!

In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging the power plug from the power outlet.

It is the customer's responsibility to follow local country regulations, including operation within legal frequency channels, output power, cabling

requirements, and Dynamic Frequency Selection (DFS) requirements. All Mikrotik devices must be professionally installed.

Quickstart

The default configuration utilizes switch chip features to configure the dumb switch. All ethernet ports are added to the switch group and the default IP

address 192.168.88.1/24.

The Initial connection has to be done via the Ethernet cable, using the MikroTik Winbox utility.

Use Winbox to connect to the default IP address of 192.168.88.1 from any port, with the username admin and no password, the device is set up

as a switch. (or, for some models, check user and wireless passwords on the sticker)

We recommend clicking the "Check for updates" button and updating your system software to the latest version to ensure the best performance

and stability.

Set up your password to secure the device.

Mounting

Produktspezifikationen