Mikrotik LHG LTE18 kit Bedienungsanleitung

Mikrotik Nicht kategorisiert LHG LTE18 kit

Lies die bedienungsanleitung für Mikrotik LHG LTE18 kit (24 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 135 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 68 Bewertungen. Hast du eine Frage zu Mikrotik LHG LTE18 kit oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Download PDF

Seite 1/24

EN - English -Quick Guide

EN - English -Quick GuideEN - English -Quick Guide:

This Quick Guide covers the model: LHGGM&EG18-EA.

This is a wireless network device. You can find the product model name on the case label (ID).

Please visit the user manual page on for the full up-to-date user manual. Or scan the QR code with your mobile phone.https://mt.lv/um

The most relevant technical specifications for this product can be found on the last page of this Quick Guide.

Technical specifications, brochures, and more info about products are at https://mikrotik.com/products

Configuration manual for software in your language with additional information can be found athttps://mt.lv/help

If you need help with configuration, please seek a consultanthttps://mikrotik.com/consultants

First steps:

First steps:First steps:

Open the Ethernet port door;

Insert the SIM card into the slot, with the chip facing UP;

Connect the device to the included PoE injector with Ethernet cable to the data+power end;

Connect the data end of the PoE injector to the computer;

Connect the power adapter to the PoE injector;

Open the in your web browser;https://192.168.188.1

User name: , and password on the label;

admin

Enter the PIN code, if required by your mobile network operator;

Use the check for update option to upgrade the device to the latest version. You must have an active SIM card with available data;

The device will reboot;

Connect again and in the menuset a strong password.

QuickSet

Safety Information:

Safety Information:Safety Information:

Before you work on any MikroTik equipment, be aware of the hazards involved with electrical circuitry, and be familiar with standard practices for preventing

accidents. The installer should be familiar with network structures, terms, and concepts.

Use only the power supply and accessories approved by the manufacturer, which can be found in the original packaging of this product.

This equipment is to be installed by trained and qualified personnel, as per these installation instructions. The installer is responsible for making sure, that the

Installation of the equipment is compliant with local and national electrical codes. Do not attempt to disassemble, repair, or modify the device.

This product is intended to be mounted outdoors on a pole. Please read the mounting instructions carefully before beginning installation. Failure to use the

correc .t hardware and configuration or to follow the correct procedures could result in a hazardous situation for people and damage to the system

We cannot guarantee that no accidents or damage will occur due to the improper use of the device. Please use this product with care and operate at your own

risk!

This is a Class A product. In a domestic environment, this product might cause radio interference in which case the user might be required to take adequate

measures.

In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging the power adapter from the power outlet.

To avoid contamination of the environment, separate the device from household waste and dispose of it in a safe manner, for example, in designated areas.

Become familiar with procedures for properly transporting the equipment to designated collection points in your area.

This MikroTik equipment complies with the European Union radiation exposure limits set forth for an uncontrolled

Exposu

ExposuExposure

re re to

to to Radio

Radio

Radio Radio Frequency

Frequency

FrequencyFrequency

Radiation:

Radiation:Radiation:

environment. This MikroTik device should be installed and operated no closer than 56.5 centimeters from your body, occupational user, or the general public.

Manufacturer: Mikrotikls SIA, Unijas 2, Riga, Latvia, LV1039.