Mikrotik PWR-LINE US Bedienungsanleitung

Lies die bedienungsanleitung für Mikrotik PWR-LINE US (4 Seiten) kostenlos online; sie gehört zur Kategorie Powerline adapter. Dieses Handbuch wurde von 71 Personen als hilfreich bewertet und erhielt im Schnitt 4.0 Sterne aus 36 Bewertungen. Hast du eine Frage zu Mikrotik PWR-LINE US oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

PWR-LINE

The PWR-LINE series devices allow Ethernet like connectivity between supported devices over regular electrical

power lines. When plugged into the same electrical circuit, the PWR devices will establish Ethernet connectivity by

using the HomePlug AV standard.

The PWR-LINE is a smart power adapter with a built-in USB cable.

This particular device is designed for supported MikroTik products with a microUSB port and PWR-LINE support.

Connect this adapter to your electrical outlet and then connect the USB cable to power your supported MikroTik

device. When doing the same with another PWR-LINE compatible device somewhere further in your premises, the

devices will form a connection without needing to install any LAN cables. The device will show up as an additional

Ethernet interface in your routers configuration interface. You can install more PWR-LINE devices to further build

your network.

Connecting

1.Plug one PWR-LINE device into a power socket.

2.Connect the built-in USB cable to the microUSB port of a supported MikroTik router.

3.Plug another PWR-LINE unit (or any other compatible device) somewhere in the same electrical circuit.

Use the sync button to connect the devices and your local network will automatically be extended. See

section Buttons and Jumpers on how to pair additional PWR-LINE devices.

Powering

The device accepts powering directly from 100-230 V ~50/60Hz wall socket it is plugged into. The power

consumption under maximum load can reach 5 W.

Buttons and Jumpers

PWR connection button (sync)

•Hold 0.5 – 3 seconds. For 120 seconds will try to communicate with another PWR-LINE device. A blinking

orange LED light indicates that it is in search mode. You have to also do the same on the other PWR

device, so they can synchronize. Press button again to cancel the search.

•Hold 5 – 8 seconds. A new security key is generated. This is needed to remove a PWR-LINE device from

an existing PWR network.

•Hold 10 – 15 seconds. Resets all PWR related settings.

See for more information. Contact for help. Modified: 11-Feb-19 Document #45868https://mikrotik.com support@mikrotik.com

Produktspezifikationen