Milwaukee 2485-20 Bedienungsanleitung

Lies die bedienungsanleitung für Milwaukee 2485-20 (1 Seiten) kostenlos online; sie gehört zur Kategorie Schleifer. Dieses Handbuch wurde von 73 Personen als hilfreich bewertet und erhielt im Schnitt 4.8 Sterne aus 37 Bewertungen. Hast du eine Frage zu Milwaukee 2485-20 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

M12 FUEL™ Die Grinder

2485-20 K92A

54-22-2100

June 2019

FIG. PART NO. DESCRIPTION OF PART NO. REQ.

1 48-68-0031 Collet Nut 1

2 48-66-0974 1/4" Collet 1

5 --------------- Damper for Support 1

13 23-28-0340 Light Pipe 1

14 44-60-0575 Rivet Pin for Housing 1

15 44-94-0050 Rod 1

16 --------------- Housing Support Head 1

17 --------------- Housing Support Grip 1

18 06-82-3002 Housing Screw 11

19 --------------- Damper for Cover 1

20 --------------- Housing Cover Grip 1

21 --------------- Housing Cover Head 1

30 12-20-2430 Service Nameplate 1

31 10-20-0625 Warning Label 1

32 42-77-0405 1/8" Collet (Optional) Not Shown 1

33 49-96-4040 Open End Wrench (1/2") 1

34 49-96-4090 Open End Wrench (11/16") 1

35 42-55-2425 Contactor Bag 1

40 14-34-0002 Housing Kit 1

41 14-20-0070 Electronics Assembly 1

42 16-01-2405 Rotor Assembly 1

43 44-10-0520 Paddle Trigger Assembly 1

44 14-46-0166 1/4" Collet and Nut Kit 1

REVISED BULLETIN

SERVICE PARTS LIST

BULLETIN NO.

WIRING INSTRUCTION

DATE

SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS

CATALOG NO. STARTING

SERIAL NO.

2

17

42

5

15

21

41

14

13

43

31

35

16

1

30

20

19

18

(x11)

44 1

2

40 5 15 16 17 18

19 20 21 30 31

33

34

EXAMPLE:

Component Parts (Small #) Are Included

When Ordering The Assembly (Large #).

0

00

SCREW TORQUE SPECIFICATIONS

SEAT TORQUE

FIG. PART NO. WHERE USED (KG/CM) (IN/LBS)

18 06-82-3002 Housing Cover Head 7-9 6.0-7.8

18 06-82-3002 Housing Cover Grip 7-9 6.0-7.8

Install the electronics assembly, route wires through wire traps and

channels as shown. Be sure all components are seated squarely

and firmly in place. Be sure there is no interference when installing

the housing covers (20, 21).

Wire Traps or Channels

MILWAUKEE TOOL l

www.milwaukeetool.com

13135 W. Lisbon Road, Brookeld, WI 53005

Drwg. 1

NOTE: Damper is pressed

in-between housing halves.

Produktspezifikationen