Milwaukee M18 Fuel 2684-20 Bedienungsanleitung
Lies die bedienungsanleitung für Milwaukee M18 Fuel 2684-20 (9 Seiten) kostenlos online; sie gehört zur Kategorie Polierer. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 2 Bewertungen. Hast du eine Frage zu Milwaukee M18 Fuel 2684-20 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/9
Cat. No. / No de cat.
2684-20, 2685-20
M18 FUEL™ 15 mm RANDOM ORBITAL POLISHER
M18 FUEL™ 21 mm RANDOM ORBITAL POLISHER
POLISSEUSE À ORBITE ALÉATOIRE DE 15 M18 FUEL™mm
POLISSEUSE À ORBITE ALÉATOIRE DE 21 M18 FUEL™mm
PULIDORA DE ÓRBITA ALEATORIA DE 15 mm M18 FUEL™
PULIDORA DE ÓRBITA ALEATORIA DE 21 M18 FUEL™mm
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
2
GENERAL POWER TOOL
SAFETY WARNINGS
WARNING
Read all safety warnings, instruc-
tions, illustrations and specica-
tions provided with this power tool. Failure to
follow all instructions listed below may result in
electric shock, re and/or serious injury. Save all
warnings and instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-oper-
ated (cordless) power tool.
WORK AREA SAFETY
• Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
• Do not operate power tools in explosive atmo-
spheres, such as in the presence of ammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
• Keep children and bystanders away while operat-
ing a power tool. Distractions can cause you to lose
control.
ELECTRICAL SAFETY
• Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodied plugs and matching outlets will
reduce risk of electric shock.
• Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet condi-
tions. Water entering a power tool will increase the
risk of electric shock.
• Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase
the risk of electric shock.
• When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
• If operating a power tool in a damp location is
unavoidable, use a ground fault circuit interrupter
(GFCI) protected supply. Use of an GFCI reduces
the risk of electric shock.
PERSONAL SAFETY
• Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the inuence of drugs, alcohol or medication. A
moment of inattention while operating power tools
may result in serious personal injury.
• Use personal protective equipment. Always
wear eye protection. Protective equipment such
as a dust mask, non-skid safety shoes, hard hat or
hearing protection used for appropriate conditions
will reduce personal injuries.
• Prevent unintentional starting. Ensure the switch
is in the o-position before connecting to power
source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your nger on
the switch or energizing power tools that have the
switch on invites accidents.
• Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.
• Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
• Dress properly. Do not wear loose clothing or
jewelry. Keep your hair and clothing away from
moving parts. Loose clothes, jewelry or long hair
can be caught in moving parts.
• If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use of
dust collection can reduce dust-related hazards.
• Do not let familiarity gained from frequent use
of tools allow you to become complacent and
ignore tool safety principles. A careless action can
cause severe injury within a fraction of a second.
POWER TOOL USE AND CARE
• Do not force the power tool. Use the correct power
tool for your application. The correct power tool
will do the job better and safer at the rate for which
it was designed.
• Do not use the power tool if the switch does not
turn it on and o. Any power tool that cannot be
controlled with the switch is dangerous and must be
repaired.
• Disconnect the plug from the power source and/
or remove the battery pack, if detachable, from
the power tool before making any adjustments,
changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of
starting the power tool accidentally.
• Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the
power tool or these instructions to operate the
power tool. Power tools are dangerous in the hands
of untrained users.
• Maintain power tools and accessories. Check
for misalignment or binding of moving parts,
breakage of parts and any other condition that
may aect the power tool’s operation. If damaged,
have the power tool repaired before use. Many
accidents are caused by poorly maintained power
tools.
• Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
• Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions and
the work to be performed. Use of the power tool
for operations dierent from those intended could
result in a hazardous situation.
• Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.
BATTERY TOOL USE AND CARE
• Recharge only with the charger specied by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of re when used
with another battery pack.
• Use power tools only with specically designated
battery packs. Use of any other battery packs may
create a risk of injury and re.
4
OPERATION
WARNING
To reduce the risk of injury, always
wear proper eye protection marked
to comply with ANSI Z87.1.
When working in dusty situations, wear appro-
priate respiratory protection or use an OSHA
compliant dust extraction solution.
Do not wear loose clothing or jewelry when oper-
ating polisher. They could get caught in moving
parts causing serious injury. Keep head away
from polisher and polishing area. Hair could be
drawn into polisher causing serious injury.
Starting, Stopping and Controlling Speed
Generally, lower speeds are recommended for tight
work areas and higher speeds are ideal for large
surface areas. Use the speed control dial to set the
maximum speed for the application.
1. Set the speed control dial to the desired maximum
speed.
2. the tool, grasp the handles rmly and pull To start
the trigger.
3. To vary the speed, increase or decrease the
pressure on the trigger. The further the trigger is
pulled, the greater the speed, up to the speed set
on the dial.
4. Use the trigger lock to the tool for continuLOCK ON -
ous use, if desired.
5. To stop the tool, release the trigger. Ensure the
tool has come to a complete stop before laying
the tool down.
Polishing
Always use the handles for proper control. Move the
polisher back and forth in long, sweeping strokes. Too
much pressure, the wrong angle or improper motion
may cause swirl marks or burning.
For detailed polishing instructions, read the instruc-
tions provided with the nishes, waxes and polishes.
ASSEMBLY
WARNING
Recharge only with the charger
specied for the battery. For spe-
cic charging instructions, read the operator’s
manual supplied with your charger and battery.
Removing/Inserting the Battery
To remove the battery, push in the release buttons
and pull the battery pack away from the tool.
WARNING
Always remove the battery pack
any time the tool is not in use.
To insert the battery, slide the pack into the body
of the tool. Make sure it latches securely into place.
WARNING
Only use accessories specically
recommended for this tool. Others
may be hazardous.
Installing/Removing/Cleaning
the Dust Screen
Using the dust screen will increase the performance
and extend the life of the tool.
CAUTION
Do not use tool without dust screen
installed.
1. To attach the dust screen, snap the screen over the
tool’s handle.
2. To remove the dust screen, insert a at screwdriver
into the notch at the top of the dust screen and pry
away from the tool.
3. To clean the dust screen, tap against a hard surface,
or blow clean with compressed air.
Removing/Installing the Backing Plate
NOTE: The backing plate diameter should match the
polishing pad diameter being used.
1. To remove the backing plate, remove the four
screws from the backing plate and pull the plate
away from the tool.
2. To install the backing plate, tighten the four screws
into the backing plate to secure it to the tool.
Installing Polishing Pads/Bonnets
NOTE: The polishing pad diameter should match the
backing plate diameter being used.
1. To install, remove the battery pack and place the
tool on its tool rest with the backing plate upright.
2. Press the polishing pad/bonnet securely onto the
backing plate. Use a centering tool, if provided, to
ensure the pad is aligned for proper balance.
3. To uninstall, remove the battery pack and reverse
the procedure.
Polishing pad
Backing plate
Produktspezifikationen
| Marke: | Milwaukee |
| Kategorie: | Polierer |
| Modell: | M18 Fuel 2684-20 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Milwaukee M18 Fuel 2684-20 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Polierer Milwaukee
9 Juli 2025
9 Juli 2025
23 Juni 2024
Bedienungsanleitung Polierer
- Parkside
- Zipper
- Porter-Cable
- Daewoo
- Tryton
- Ultimate Speed
- Verto
- Dino KRAFTPAKET
- Sun Joe
- Vonroc
- Makita
- Speed & Go
- Herkules
- Black And Decker
- DeWalt
Neueste Bedienungsanleitung für -Kategorien-
11 Juli 2025
7 Juli 2025
7 Juli 2025
7 Juli 2025
6 Juli 2025
15 Juni 2025
3 Juni 2025
4 Dezember 2024
3 Dezember 2024
30 November 2024