Mitsubishi UD8400U Bedienungsanleitung
Mitsubishi
Videostrahl
UD8400U
Lies die bedienungsanleitung für Mitsubishi UD8400U (76 Seiten) kostenlos online; sie gehört zur Kategorie Videostrahl. Dieses Handbuch wurde von 30 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 15.5 Bewertungen. Hast du eine Frage zu Mitsubishi UD8400U oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/76

U
UD8400
This User Manual is important to you.
Please read it before using your projector.
DLP™ PROJECTOR
MODEL
UD8400U
User Manual

EN-2
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The lightning fl ash with arrowhead symbol within an equilateral triangle is intended to alert
the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure
that may be of suffi cient magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the literature
accompanying the appliance.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION:
TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD,
RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE
EXPOSURE.
NOTE:
SINCE THIS PROJECTOR IS PLUGGABLE EQUIPMENT, THE SOCKET-OUTLET SHALL BE INSTALLED NEAR
THE EQUIPMENT AND SHALL BE EASILY ACCESSIBLE.
WARNING
Use the attached specifi ed power supply cord. If
you use another power supply cord, it may cause
interference with radio and television reception.
This apparatus must be grounded.
DO NOT LOOK DIRECTLY INTO THE LENS WHEN
THE PROJECTOR IS IN THE POWER ON MODE.
CAUTION
Not for use in a computer room as defi ned in the
Standard for the Protection of Electronic Computer/
Data Processing Equipment, ANSI/NFPA 75.

EN-3
Contents
Important safeguards ........................................................................................................................4
Preparing your projector ....................................................................................................................6
Using the remote control ...................................................................................................................9
Setting up your projector .................................................................................................................11
Viewing computer images ...............................................................................................................19
Viewing video images ......................................................................................................................26
Menu operation ...............................................................................................................................31
Adjusting projected images .............................................................................................................42
Initial network settings .....................................................................................................................49
Lamp relay .......................................................................................................................................53
Advanced features ..........................................................................................................................55
Replacing the lamp .........................................................................................................................62
Maintenance ....................................................................................................................................64
Automatic cleaning fi lter ..................................................................................................................65
Troubleshooting ...............................................................................................................................67
Indicators .........................................................................................................................................71
Specifi cations ..................................................................................................................................72
Trademark, Registered trademark
• DLP™, Digital Micromirror Device, DMD and BrilliantColor™ are all trademarks of Texas Instruments.
• HDMI, the HDMI logo and High-Defi nition Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing LLC.
• Microsoft, Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation
in the United States and/or other countries.
• Mac is a registered trademark of Apple Inc.
• The trademark of PJLink is trademark applied for registration or registered trademark in Japan, the United States,
and other countries and areas.
• Crestron RoomView Connected is a trademark of Crestron Electronics, Inc.
• Other brand or product names are trademarks or registered trademarks of their respective holders.
Produktspezifikationen
Marke: | Mitsubishi |
Kategorie: | Videostrahl |
Modell: | UD8400U |
Eingebaute Lautsprecher: | Nein |
WLAN: | Nein |
Breite: | 490 mm |
Tiefe: | 421 mm |
Gewicht: | 16000 g |
Mitgelieferte Kabel: | AC, RS-232, VGA |
Produktfarbe: | Weiß |
Übertragungstechnik: | Kabelgebunden |
Höhe: | 201 mm |
Energiequelle: | AC |
AC Eingangsspannung: | 100 - 240 V |
AC Eingangsfrequenz: | 50 - 60 Hz |
Eingebautes Display: | Nein |
Fernbedienung enthalten: | Ja |
Eingebauter Ethernet-Anschluss: | Nein |
Stromverbrauch (Standardbetrieb): | 860 W |
Anzahl Ethernet-LAN-Anschlüsse (RJ-45): | 1 |
Betriebsanleitung: | Ja |
Kontrastverhältnis: | 2000:1 |
Anzahl HDMI-Anschlüsse: | 1 |
Stromverbrauch (Standby): | 0.4 W |
Geräuschpegel: | 28 dB |
Analoges Signalformatsystem: | NTSC, NTSC 4.43, PAL, PAL 60, PAL M, PAL N, SECAM |
RS-232 port: | 2 |
Composite Video-Eingang: | 1 |
HDCP: | Ja |
Unterstützte Video-Modi: | 1080i, 1080p, 480i, 480p, 576i, 576p, 720p |
Unterstützte Grafik-Auflösungen: | 1920 x 1200 (WUXGA) |
3D: | Nein |
DVI Anschluss: | Nein |
Full-HD: | Ja |
Zoom-Fähigkeit: | Ja |
Akkus/Batterien enthalten: | Ja |
Integrierter Kartenleser: | Nein |
Projektorhelligkeit: | 6500 ANSI Lumen |
native Auflösung des Projektors: | WUXGA (1920x1200) |
Matrix Größe: | 0.67 Zoll |
Projektionsflächenkapazität: | - Zoll |
Projektionsabstand: | - m |
Anzahl VGA (D-Sub) Anschlüsse: | 1 |
Serielle Schnittstelle: | RS-232 |
Seitenverhältnis: | 16:10 |
Anzahl Lampe(n): | 2 Lampen |
Lebensdauer der Lichtquelle: | 2000 h |
Brennweitenbereich: | 24.5 - 33.1 mm |
Anzahl S-Video-Eingänge: | 1 |
HD-Ready: | Ja |
Vertikaler Scanbereich: | 50 - 95 Hz |
Horizontaler Scanbereich: | 15 - 100 kHz |
Lebensdauer der Lichtquelle (ökonomischer Modus): | 8000 h |
BNC Eingänge: | 1 |
Stromeingang: | Ja |
Zoomverhältnis: | 1.35:1 |
Blendenbereich (F-F): | 2 - 2.4 |
Punkt-Scan-Frequenz: | 162 MHz |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Mitsubishi UD8400U benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Videostrahl Mitsubishi
25 Juni 2024
25 Juni 2024
25 Juni 2024
25 Juni 2024
25 Juni 2024
25 Juni 2024
25 Juni 2024
25 Juni 2024
27 Mai 2024
17 Mai 2024
Bedienungsanleitung Videostrahl
Neueste Bedienungsanleitung für -Kategorien-
13 August 2024
9 August 2024
9 August 2024
23 Juni 2024
23 Juni 2024
23 Juni 2024
23 Juni 2024
23 Juni 2024
22 Juni 2024
22 Juni 2024