Monacor NTR12-3018D Bedienungsanleitung

Lies die bedienungsanleitung für Monacor NTR12-3018D (1 Seiten) kostenlos online; sie gehört zur Kategorie Lautsprecher. Dieses Handbuch wurde von 24 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 3 Bewertungen. Hast du eine Frage zu Monacor NTR12-3018D oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

LF Cast Chassis / Neo

NTR12-3018D

Features

12" neodymium woofer oers 350Wrms (AES standard) power handling and 98dB

sensitivity

3" high temperature Inside/Outside voice coil eciently dissipates heat,

preventing sensitivity loss through thermal compression

"M-roll" surround provides progressive excursion control, yielding a

smooth response even at extremes of frequency range

Extremely lightweight design combined with a highly ecient magnet

assembly results in exceptional power-to-weight ratio

Intelligent heat management in both chassis and magnet assembly design

further minimises distortion

8 Ω Frequency Response

1.Tested for two hours using a continuous, band-limited pink noise signal as per AES standard. Power

calculated on minimum impedance. Loudspeaker tested in free air.

2.Measured on axis at 1W, 1m in 2 anechoic environment.

3.Xmax derived from: (voice coil winding width-gap depth)/2.

4.Small signal parameters measured after unit subjected to pre-conditioning signal.

General Specications

Nominal diameter305mm/12in

Power rating 1350Wrms

Nominal impedance8 Ω

Sensitivity 298dB

Frequency range50-4000Hz

Voice coil diameter75mm/3in

Chassis typeCast aluminium

Magnet typeNeodymium

Coil materialRound copper

Former materialGlass bre

Cone materialKevlar loaded paper

Surround materialCloth sealed

Suspension Single

Xmax 34mm/0.16in

Gap depth8mm/0.32in

Voice coil winding width16mm/0.63in

Small Signal Parameters4

D 0.26m/10.24in

Fs 58.7Hz

Mms 57.21g/2.02oz

Mmd 50.28g/1.78oz

Qms 2.514

Qes 0.326

Qts 0.288

Re5.69 Ω

Vas 51.21lt/1.808ft3

BI 19.54Tm

Cms 0.128mm/N

Rms 8.397kg/s

Le (at 1kHz)0.78mH

Mounting Information

Diameter 318mm/12.5in

Overall depth137mm/5.39in

Cut-out diameter286mm/11.26in

Mounting slot dimensions9.5mm x 6.5mm/0.37in x 0.26in

Number of mounting slots8

Mounting slot PCD298-304mm/11.7-12.0in

Unit weight2.6kg/5.7lb

Packed Dimensions & Weight

Single pack size W x D x H350mm x 350mm x 185mm

/13.8in x 13.8in x 7.3in

Single pack weight3kg/6.6lb

Multipack (60) size W x D x H1080mm x 980mm x 880mm

/42.5in x 38.6in x 34.6in

Multipack (60) weight146kg/321lb

Celestion, Claydon Business Park, Great Blakenham, Ipswich, IP6 0NL United Kingdom

Produktspezifikationen