Monitor Audio Bronze AMS 6G Bedienungsanleitung
Monitor Audio
Lautsprecher
Bronze AMS 6G
Lies die bedienungsanleitung für Monitor Audio Bronze AMS 6G (10 Seiten) kostenlos online; sie gehört zur Kategorie Lautsprecher. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 4.0 Sterne aus 1.5 Bewertungen. Hast du eine Frage zu Monitor Audio Bronze AMS 6G oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/10
Product Manual
Contents
Introduction: 1
Attaching Feet and Spikes 2
For Carpeted Floors 2
For Wooden/ Hard Floors 2
Setting Up Your Loudspeakers 2
2 Channel Positioning 2
AV Positioning 3
Setting Up Bronze FX 3
Atmos 4
In-Ceiling 4
Bronze AMS Dolby Atmos
®
enabled speakers 4
Fixing Bronze FX & Bronze AMS to a Wall 4
Wiring 5
Single Wiring 5
Bi-Wiring 5
Bi-Amping 5
The Effects of Bi-Wiring and Bi-Amping 6
Port Bungs 6
Running-In Your Speakers 7
Retention Bolt Adjustment 7
Warranty 7
Owner Information 7
Specifications 8
monitoraudio.com 1
Introduction:
The Bronze Series has been intricately engineered to optimise your audio experience, whether you’re
listening to your favourite album or watching the latest Hollywood blockbuster.
Consisting of eight different models, you can create the perfect sound system to suit your music or home
cinema needs, from our compact bookshelf speakers to the powerful yet detailed performance of our larger
floorstanding speakers. With the addition of our new Dolby Atmos
®
Enabled upward-firing speakers, you
can add a whole new dimension to your favourite movie experiences.
Bronze Series is made for you, for your home, and for the performance you desire.
Bronze Series2
Attaching Feet and Spikes
For Carpeted Floors
A
(Bronze 200 and 500 only)
The spikes and ‘out-riggers’ are supplied assembled for
use on carpeted floors or where spikes are appropriate. All
that is required is to fix them to the speaker base using the
supplied bolts (A & B).
You can check that the speaker is level on all sides by using
a spirit level (not supplied). If it’s slightly off-level, unscrew
the spike and check again. Continue this process until the
cabinet is fully level. Use the locking nuts on each foot to fix
the spike in place and to stop any unwanted vibrations.
Please ensure there are no hidden wires under the carpet that could be damaged by the
spikes.
For Wooden/ Hard Floors
A
B
(Bronze 200 and 500 only)
Remove the spikes and replace with the supplied rubber feet.
Fix the ‘out-riggers’ to the speaker base with the padded
side touching the cabinet using the supplied bolts (A & B).
You can check that the speaker is level on all sides by using
a spirit level (not supplied). If it’s slightly off-level, unscrew
the rubber foot and check again. Continue this process until
the cabinet is fully level. Use the locking nuts on each foot
to fix them in place and to stop any unwanted vibrations.
Setting Up Your Loudspeakers
2 Channel Positioning
xm
xm
xm
When arranging a 2 channel (stereo) system, the listening
position and the loudspeakers should form an equilateral
triangle. The speakers should be positioned approximately 6 -
10 feet (1.8 - 3 m) apart. The ideal distance from the rear wall
varies depending on the speaker (see list below), however, for
optimal performance they need to be a minimum of 3 feet (91
cm) from the side walls.
• Bronze 50 6 - 12 inches (15 - 30 cm)
• Bronze 100 & 200 8 - 14 inches (20 - 36 cm)
• Bronze 500 12 - 24 inches (30 - 61 cm)
NOTE: These are recommended distances for optimal
performance. Actual results will vary dependant on room
size and construction.
Experimentation is strongly advised when initially setting up the speakers, as environment and personal
preference differ with every installation. If there is insufficient bass for example, try moving your speakers
closer to a wall. The opposite approach is recommended if there is excess bass. Also see the information
in the Port Bungs section. If stereo imaging is being lost, try ‘toeing’ them in slightly. The sound should
appear to originate from the centre point between the speakers, not the actual speakers themselves.
B
A = M10 x 1.25 x 16 mm
B = M4 x 1.25 x 16 mm
A = M10 x 1.25 x 16 mm
B = M4 x 1.25 x 16 mm
Produktspezifikationen
| Marke: | Monitor Audio |
| Kategorie: | Lautsprecher |
| Modell: | Bronze AMS 6G |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Monitor Audio Bronze AMS 6G benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Lautsprecher Monitor Audio
22 Juli 2025
22 Juli 2025
22 Juli 2025
22 Juli 2025
5 Juli 2025
4 Juli 2025
3 Juli 2025
2 Juli 2025
21 Juni 2025
19 Juni 2025
Bedienungsanleitung Lautsprecher
- Gembird
- JGC
- Zvox
- Phonocar
- Exibel
- Revel
- Crest Audio
- Terratec
- Pioneer
- Perfect Choice
- Tronsmart
- HQ Power
- Xiaomi
- Razer
- Bang And Olufsen
Neueste Bedienungsanleitung für -Kategorien-
22 Juli 2025
22 Juli 2025
22 Juli 2025
22 Juli 2025
22 Juli 2025
22 Juli 2025
22 Juli 2025
22 Juli 2025
22 Juli 2025
22 Juli 2025