Mooer Modverb Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Mooer Modverb (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 16 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
DC IN
DEPTH
Flanger
Vibrato
Phaser
MIX DECAY
ModV
erb
Main Features
7
1.True bypass footswitch:
Engages and disengages the effect
Hold the footswitch to activate Freeze
effect.
2.On/Off Led:
Displays the on/off status of the pedal.
Controls tap tempo. Tap the LED 2 or
more times to synchronize the modulation
rate to your desired tempo.
3.Mix control:
Adjusts the reverb and modulation
effect mix.
4.DEPTH
Adjusts the depth of the modulation.
5. Toggle switch
Selects between Flanger,
Vibrato and Phaser modulation effects.
6. DECAY
Adjusts the decay of the reverb effect.
7. DC in power jack: Input for power supply, use a 9V DC regulated power
supply , ,160mA,center pin negative.
8. Input jack : 1/4” audio jack for connecting to the input device or
instrument.
9. Output jack : 1/4” audio jack, effect output for connection to amp or
other devices.
*Notes Any specification’s update will not be amended in this manual.:
PLEASE READ CAREFULLY BEFORE PROCEEDING
Interference with other electrical devices and Cleaning
Radios and televisions placed nearby may experience reception interference.
Operate this unit at a suitable distance from radios and televisions.
Clean only with a soft, dry cloth.
Power Supply
Please connect the designated AC adapter to an AC outlet of the correct voltage.
Please be sure to use only an AC adapter which supplies 9V DC, ,center
negative. Please do not use an AC adapter which supplies more than 9V DC.
Unplug the AC power adapter when not in use or during electrical storms.
Precautions
Handling
Do not apply excessive force to the switches or controls.
Do not let paper, metal, or other objects into this unit.
Take care not to drop the unit, and do not subject it to shock or excessive pressure.
4 6
9
1
3
2
Pedal layout
FCC certification
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
This device may not cause harmful interference.
This device must accept any interference received, including interference
that may cause undesired operation.
5
Part No:620010601
Modulation Reverb Pedal
ModVerb
Connections
Always turn off the power and all other equipment before connecting or
disconnecting. This will help prevent malfunction and damage to any of the devices.
Make sure to unplug all connection cables and power cords before moving this unit.
To avoid deformation, discoloration, or other serious damage,
do not expose this unit to the following conditions:
Direct sunlight
Magnetic fields
Excessively dusty or dirty location
Strong vibration or shock
Extreme temperature or humidity
High humidity or moisture
Heat sources
Frozen functionality
Small and compact size
True bypass
High quality reverb with 3 modulation types:Flanger, Vibrato, Phaser
DEPTH, DECAY, and MIX controls.
Tap tempo functionality
8
Modes:High quality reverb, 3 kinds of modulation effect with tap tempo and
frozen functionality.
Input:1/4” mono audio jack. Impedance: 470k Ohms( )
Output:1/4” mono audio jack Impedance: 100 Ohms( )
Power requirements: AC adapter 9V DC , center negative. Highly
recommend to use Mooer Micro Power.
Current Draw:160mA
Dimensions:93.5mm(D) x 42mm(W) x 52mm(H)
Weight:146g
Accessories:Owner’s Manual
调制混响单块
连接
连接设备或断开连接前,请务必关闭电源及其他设备,这将有助于避免故障和损害其他设
备。另外,要确保移动本机前断开所有的连接线和电源线。
放置场所
为防止变形、变色,及其他严重损坏,请避免以下情况:
•阳光直射 •靠近热源
•磁场 •高温潮湿
•多尘或不洁的地方 •湿度较大
•强烈震动或摇晃
电器干扰
在使用本机时,收音机和电视机可能会造成干扰。使用本机时要远离收音机和电视机。
清洁
请使用干燥柔软的布清洁本机。如有必要,可用稍微湿润的布拭擦。切勿使用粗糙的清洁
粉、酒精、涂料稀释剂、蜡、溶剂、清洁剂及化学试剂等浸渍抹布。
操作
请勿暴力使用开关及控制元件。
请勿让纸屑、金属制品及其他物体落入机内。
注意不要摔落,不要使其受到冲击及过度压力。

*免责声明:参数更新恕不另行通知
电源供应
请使用正确的交流电源插座连接电源变压器。
请使用内负外正 的 (± )电源变压器,否则将会导致设备损坏,着火或9V 10%
者其他问题。不使用时或雷雨天时请拔下电源。
ModVerb
DC IN
DEPTH
Flanger
Vibrato
Phaser
MIX DECAY
ModVerb
7
4 6
9
1
3
2
5
8
三种调制混响模式选择: 模式, 模式和 模式。 FLANGER VIBRATO Phaser
提供 和 旋钮调节调制和混响效果参数DEPTH, DECAY MIX
LED TAP TEMPO按键灯调节 功能
长踩脚钉进入 状态,可产生自激效果。feedback
全金属 外壳MINI
9V电源供电
1 .T RU E BYPA S S 踩钉:轻踩效果器开关,
开启或关闭效果;在效果开启状态长踩
保持进入 模式,激活自激功能feedback
,松开踩钉时恢复正常效果
2 .L ED灯:LED提示效果器工作状态,
附带TAP TEMPO功能,轻按两下可根据
按下速度调节所选调制效果的速率。
3 .M IX旋钮:调节总体调制效果和混响效
果与干声的比例。
4 .D EP TH旋钮:调试调制类效果的深度。
5 .三档拨档:可选择当前使用调制类效果
的模式,分别为 模式,FLANGER
VIBRATO PHASER模式和 模式。
6 .D EC AY旋钮:调节为混响效果的深度。
7. 9VD C9 V使用 直流变压器(内负外
正 , )160mA
8 .I NP UT输入:1/4”单声道音频接口,
连接输入信号。
9 .O UT PUT输出:1/4”单声道音频接
口,连接输出信号。
1 9V 160mA.连接电源( ,内负外正 , )
2 ModVerb INPUT OUTPUT.连接吉他信号输入至 的 接口, 接口连接至音箱输入接口
3.踩下踩钉开启效果器,通过提供的旋钮调节对应参数获得需要的效果音色
工作模式:调制混响效果,可独立调节参数,附带 功能和自激模式。TAP TEMPO
输入:1/4” 470k Ohms单声道音频接口(阻抗 )
输出:1/4” 100 Ohms单声道音频接口(阻抗 )
电源供给:9V Mooer Micro Power直流变压器(内负外正),推荐使用
工作电流:160mA
尺寸:93.5mm(D) x 42mm(W) x 52mm(H)
重量:146g
附件:用户手册
P a rt No:62 00 1 0 6 01


Produktspezifikationen

Marke: Mooer
Kategorie: Nicht kategorisiert
Modell: Modverb

Brauchst du Hilfe?

Wenn Sie Hilfe mit Mooer Modverb benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Mooer

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂźr -Kategorien-