Moonki MH-O710BT Bedienungsanleitung

Lies die bedienungsanleitung für Moonki MH-O710BT (2 Seiten) kostenlos online; sie gehört zur Kategorie Kopfhörer. Dieses Handbuch wurde von 21 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 11 Bewertungen. Hast du eine Frage zu Moonki MH-O710BT oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

On the right earcup,carefully plug the USB cable into USB charging port and connect

the other end of the cable to either a computer USB port or to a USB-compatible car or

wall charger.

Solid red LED light will appear to indicate when the headphone is charging.

When charging is complete, the LED light will turn Blue.

Charging time is approximately 1.5 hours.

Press & hold the power button on the right side of the headphone for about 3 seconds

until the LED indicator light turns on.

Press & hold the power button again for 3 seconds until the LED light turns off.

Power on the wireless bluetooth headphone(refer to the “Turn It On”section).

To pair the headphone with a new device,the red & blue LED light blink to indicate it is

ready to be paired with you device.

On your Bluetooth-enabled smartphone,tablet or media player,navigate to the

Bluetooth settings menu,turn on the Bluetooth feature,and search for new devices After

a few seconds you will see “MH-O710BT”listed.

Tap this model to select it.Solid blue LED light indicate your device has successfully

paired.

With your previously paired device’s Bluetooth turned on and in range,The headphone

will automatically reconnect to the last Bluettooth device it was connected to.

NOTE:If the headphone is not used within 5 minutes,the headphones will automatically

turn off to save battery.

Connect your device to the headphone via Bluetooth(refer to the”Pair & Connect”section)

Open your favorite music app and press play.

Control the music,track & volume from your device,or control the music & volume.Press the

Power button once to play/pause music & answer calls,press it twice to redial the last number

called on your phone,and press & hold it to reject an incoming call.

All audio,including music,games,videos,and notifications will be routed through

the headphone.

Press&Hold button (refer to product Diagram) to turn up the volume

Press&Hold button (refer to product Diagram) to turn down the volume.

Press button (refer to product Diagram) to nex track.

Press button (refer to product Diagram) to previous track.

Without Charge

Rechargeyourwireless bluetooth headphoneusing the

USB cable.

Makesureyour Bluetooth device has A2DP profile.

Check if both devices arepairedandconnectedover

Bluetooth.Restart the headphone to reconnect your

Bluetooth device.

Navigate to your Bluetooth settings menuonyour Bluetooth

device,tap “MH-O710BT”,and select “Forget”.

Now follow thesteps to pairyourdevice again.Or, press &

hold thepowerbuttonon theheadphone

(while powered on)

to disconnect the headphones from any connected devices.

Then follow the steps to reconnect your device.

Music isnot playing

over Bluetooth

Bluetooth device will

not reconnect with

the headphone

Recharge

Turn It On/Off

Pair & Connect With New Device

Play

Button Function

Toroubleshooting

Product Diagram

MH-O710BTMH-O710BT

Previous Track / Volume Dowm

Voice Assistant

USB Type C Charging Port

LED indicator

Play/Pause,Answer/End Calls

Double Click: Re-dial Last Dialed Phone Number

Press & Hold (1-2 Sec):Reject Incoming Call

Microphone

Press & Hold (3 Sec):Power On

Press & Hold (3 Sec):Power Off

Next Track / Volume Up

Press button (refer to product Diagram) to Voice Assistant.

USING MANUALUSING MANUAL

Produktspezifikationen