Mount-It! MI-2829 Bedienungsanleitung


Lies die bedienungsanleitung für Mount-It! MI-2829 (4 Seiten) kostenlos online; sie gehört zur Kategorie Flachbildschirmunterstützung. Dieses Handbuch wurde von 4 Personen als hilfreich bewertet und erhielt im Schnitt 4.8 Sterne aus 2.5 Bewertungen. Hast du eine Frage zu Mount-It! MI-2829 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/4
ADJUSTABLE TV WALL MOUNT
SKU: MI-2829
Please scan this QR code
to visit the product page.
(855) 925-5668
Check carefully to make sure there are no missing or defective parts. Some hardware provided may not be used.
Use the correct wall mounting and TV mounting hardware suitable for your installation.
VESA BRACKET(x1) WALL PLATE(x1)
WALL MOUNTING HARDWARE
(Mount-It!) for a replacement.
please contact us
please contact us
(Mount-It!) for assistance.
COMPATIBLE VESA SIZES FITS MOST TVS UP TO WEIGHT RATING
WARNING: This installation manual is intended to provide guidance on how to install the TV mount and the TV on a suitable wall.
Please contact a qualified professional if you are unsure of the steps described in the manual or have doubts about the safety of the
installation. Improper installation may cause damage or serious injury. We cannot be held liable for damage or injury caused by
improper mounting. Incorrect assembly, inappropriate use or for use cases not explicitly specified in this document. If unsure, please
contact us at www.mount-it.com. Email at support@mount-it.com, or call us at (855) 925-5668
MI-2829
32
20kg
(44lbs)
Missing Parts? Call us at (855) 925-5668 and we will ship replacement parts free of charge.
M5
C(x4)
M5x12mm
B(x4)
M4x12mm
A(x4)
M8
D(x4)
M6x50mm LAG SCREW
F(x2)
CONCRETE ANCHORS
E(x2)
PACKAGE CONTENTS
(for concrete/brick wall installation)
(for concrete/brick wall installation)
CHOKING HAZARD. Package includes small parts. Not for children under 3 years. Adult supervision is required
We recommend using professional installation services if you are unable to follow the instructions provided in this manual.
INSTALLATION OPTION 2: Concrete/Brick Wall Installation
TOOLS
REQUIRED
1. Hold the Wall Plate to the desired mounting location and verify level with a bubble level. Mark
drilling locations with a pencil.
2. At the marked locations drill pilot holes with a 5/16 (8mm) drill bit to a depth of 2 (50mm).
3. Change point 3 text: Clear any debris or dust from the pilot holes and insert Concrete Anchors
E(x2). Secure the Wall Plate to the wall with Lag Screw F(x2).
WARNING
Tighten screws so that wall plate is firmly
attached,but do not overtighten.Overtightening
holding power.
INSTALLATION OPTION 1: Wood Stud Installation
TOOLS
REQUIRED
CAUTION: DO NOT INSTALL ON DRY WALL ALONE, INSTALL MOUNT ON A WOOD STUD. USER MUST
VERIFY THE WALL CAN HOLD THE WEIGHT OF THE TV AND THE TV MOUNT
1. Locate the wood studs on the wall with a stud finder. Hold the Wall Plate to the center of the
stud and verify level with a bubble level. Mark drilling locations with a pencil.
2. At the marked locations drill pilot holes with a 3/16 (4.5mm) drill bit to a depth of 1.6 (40mm).
Secure the Wall Plate to the wall with Lag Screws F(x2).
NOTE 1: Failure to drill pilot holes may result in the lag screw heads snapping.
NOTE 2: Do not use Concrete Anchors E for wood stud installation.
WARNING
Tighten screws so that wall plate is firmly
attached,but do not overtighten.Overtightening
holding power.
40
1.6
4.5mm
3
F
F
E
5/16
8
5
2


Produktspezifikationen

Marke: Mount-It!
Kategorie: Flachbildschirmunterstützung
Modell: MI-2829

Brauchst du Hilfe?

Wenn Sie Hilfe mit Mount-It! MI-2829 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten