Mount-It! MI-307 Bedienungsanleitung


Lies die bedienungsanleitung für Mount-It! MI-307 (5 Seiten) kostenlos online; sie gehört zur Kategorie Unterstützung für Flachbildschirme. Dieses Handbuch wurde von 29 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 15 Bewertungen. Hast du eine Frage zu Mount-It! MI-307 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/5
ULTRA-SLIM & HEAVY-DUTY
TV WALL MOUNT
MI-307
Please scan this QR code
to visit the product page.
Thank you for choosing Mount-It
2
Mount-It!
Mount-It!
Mount and Accessories
4
Step 2
• Use a stud finder to locate the center of the studs and hold Wall Mount(#A) to the wall in the desired
mounting location.
• Place the Bubble Level (#D) centered on the top of the Wall Mount (#A) and ensure that the mount is level.
• Mark the center of the studs through the mount as shown.
• Remove the Mount from the wall and drill holes in the marked locations using a 3/16” drill bit (4.5mm) to
a depth of 2.2” (55mm).
• Hold the Wall Mount (#A) to the wall over the holes, check the level once again, and install the 4 Lag
Screws (#W-A) and Washers (#W-C) then tighten until secure.
Wood Stud Installation Option
Step 1


Produktspezifikationen

Marke: Mount-It!
Kategorie: Unterstützung für Flachbildschirme
Modell: MI-307

Brauchst du Hilfe?

Wenn Sie Hilfe mit Mount-It! MI-307 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten