Munchkin Brica Stretch to Fit Bedienungsanleitung

Lies die bedienungsanleitung für Munchkin Brica Stretch to Fit (1 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 9 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 5 Bewertungen. Hast du eine Frage zu Munchkin Brica Stretch to Fit oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Questions?

1.866.869.8257

brica.com

©2012 BRICA, Inc. 500 West 5th Street,

Suite 220, Charlotte, NC 28202

Retain this address for future reference.

stretch-to-fit

™

sun shade

61002

(fig. A)

Instructions

(fig. B)

For use ONLY on interior vehicle windows.

NOT for use on front windshield while vehicle is in motion.

Installation:

1. Make sure windows and suction cups are clean and dry.

2. Position one suction cup in top corner of window.

3. Activate Push Lock™ suction cup by firmly pressing blue cap.

4. Stretch shade to desired width and position/activate second top cup.

5. Stretch shade corners to desired locations to create your custom shade shape and

position/activate both lower suction cups.

NOTE: For a more tailored fit on sloped windows, connect snaps on same side of shade. This

will shorten fabric on shorter side of vehicle window for a better look. (fig. A)

6. If joining two Stretch-to-Fit shades together to span a large window, mount shades side by side.

Connect snaps after mounting. (fig. B)

Removal:

1. Pull small tab on base of each Push-Lock™ suction cup to break seal between vehicle window

and suction cup.

2. Store shade in safe place.

Produktspezifikationen