MuxLab 500777-RX Bedienungsanleitung

Lies die bedienungsanleitung für MuxLab 500777-RX (2 Seiten) kostenlos online; sie gehört zur Kategorie Audio/Video-Konverter. Dieses Handbuch wurde von 17 Personen als hilfreich bewertet und erhielt im Schnitt 4.8 Sterne aus 9 Bewertungen. Hast du eine Frage zu MuxLab 500777-RX oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

© MuxLab Inc. 94-000909-A SE-000909-A

2321 Rue Cohen, Montreal, Quebec, Canada. H4R 2N7

Tel: (514) 905-0588 Fax: (514) 905-0589

Toll Free (North America): (877) 689-5228

E-mail: [email protected] URL: www.muxlab.com

Specifications

Specifications

Environment HDMI and USB connectivity.

Devices

Blu

-

Ray, projectors, monitors, TV, PC, laptops, servers, and Smart White Boards.

Bandwidth

300MHz

Signals

HDMI 2.0b (4K/30 4:4:4 & 4K/60 4:2:0),

USB

1.1

&

2.0

and HDCP 2.2

Connectors

Note: Cables not included.

One (1) HDMI receptacle

Four (1) USB type A connectors

One (1) RJ45 for Ethernet connectivity

One (1) 3.5mm jack for Audio-Out

One (1) 3.5mm jack for Directional IR

One (1) 2.1mm jack for power

Maximum Distance

Based on a maximum

length of 6.6ft (2m) of

HDMI cable per end.

Cat5e/6: 330ft (100m)

Note: When installed in an electrically noisy environment, an STP cable must be used. Also,

cross-connection reduces the effective distance depending on the grade of twisted cable used.

Latency

Typical one (1) frame (16ms)

Compression JPG2000

Bandwidth

Up to 500Mbps

Network Requirement

1 Gig Ethernet with IGMP, Jumbo Frames and PoE

RJ45 Pin Configuration

Reverse Polarity Sensitive.

Use EIA/TIA 568A or 586B

straight-through wiring.

RJ45 Link

Pin 1 (R) Pin 2 (T)

Pin 3 (R) Pin 6 (T)

Pin 4 (R) Pin 5 (T)

Pin 7 (R) Pin 8 (T)

Power Source This device supports PoE (PD), an external power supply is not included. It is intended to be

powered via a PoE (PSE) Ethernet Switch. If required, an optional power supply (500993) may

be purchased separately.

PoE

IEEE 802.3af

Power Consumption

3W

Temperature Operating: 0° to 40°C Storage: -20° to 85°C

Humidity: Up to 95% non-condensing

Dimensions

5.03” x 4.53” x 1.

66 (128mm x 115mm x 4

2mm)

Weight 1.35 lb (0.61 kg)

Compliance Regulatory: FCC, CE, RoHS Flammability: 94V0

Warranty

3 years

Order Information 500777-RX HDMI/USB over IP PoE Wall Plate Receiver, UHD-4K

500777

-

R

X

-

WH

HDMI/

USB ove

r IP PoE Wall Plate

Receiv

er, U

HD

-

4K

(White)

Accessories

(This item is sold

separately)

500993 Universal Locking Power Supply 5VDC/2.6A US/UK/EU Blade

HDMI over IP PoE Wall Plate Receiver

500777-RX

Quick Installation Guide

Overview

The HDMI over IP PoE Wall Plate Receiver allows HDMI and USB equipment to be connected up

to 330ft (100m), with video supported at up to 4K (3840x2160) resolution @ 30Hz via one (1)

Cat5e/6 unshielded twisted pair cable in a point-to-point configuration. The USB port may be used

for extending various USB devices including Smart Boards. Point-to-multipoint and multipoint-to-

multipoint configurations are also possible by connecting several Transmitters and Receivers to the

same local Ethernet IP network via an Ethernet Switch. The HDMI/USB over IP PoE Wall Plate

Receiver also supports PoE (PD) if used with a PoE (PSE) Ethernet Switch.

For the point-to-multipoint and multipoint-to-multipoint configuration the Ethernet Switch must

have Gigabit ports, Jumbo Frame capability, DHCP Server capability, PoE, and additionally

support the IGMP communication protocol for the multipoint-to-multipoint case. MuxLab

recommends using the Cisco SG300 or SG500 Series Managed Switches.

The MuxLab ProDigital Network Controller (500811) is available to simplify the configuration and

utilization of the 500777-RX and other MuxLab IP based products via an Ethernet web interface.

The MuxLab Control Android and iOS Application may also be used for connectivity management,

in combination with the 500811 Network Controller.

Applications

Applications include commercial and residential AV systems, classroom systems, digital signage,

boardroom systems, conference rooms, and collaborative PC systems.

Installation

1.Identify the connectors on the Transmitter as indicated on the product labels, see the above product

view for further details. Note that the Ethernet network connector is on the rear.

2.Verify that the distance between the HDMI/USB over IP PoE Wall Plate Transmitter and

other MuxLab Receivers is within the specifications (see Specifications table for more

details).

3.Connect the Receiver to the HDMI display equipment with an HDMI compliant cable.

3a. If the application is point-to-point, then connect one (1) Cat 5e/6 cable (or higher)

coming from the Transmitter, to the RJ45 LINK connector on the Receiver. If

transmitting over the network, use an Ethernet Switch between Transmitter and

Receiver.

Produktspezifikationen