MXR EVH Phase 90 Bedienungsanleitung

MXR Nicht kategorisiert EVH Phase 90

Lies die bedienungsanleitung für MXR EVH Phase 90 (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 4 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 2.5 Bewertungen. Hast du eine Frage zu MXR EVH Phase 90 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/2
92503003509 revB
POWER
The EVH Phase 90 is powered by
one 9 volt battery (remove bottom
plate to install), a 9 volt AC adapter
such as the Dunlop ECB003/
ECB003EU, or a power supply
such as the DC Brick
DESCRIPTION
• Deep, rich phasing
• SCRIPT switch toggles
between old school and
modern phase sounds
• Custom EVH paint job
DIRECTIONS
• Run a cable from your guitar to
the EVH Phase 90’s INPUT jack
and run another cable from the
EVH Phase 90’s OUTPUT jack
to your amplier.
• Start with the SPEED knob at
12 oclock.
• Turn the eect on by depressing
the footswitch.
SPECIFICATIONS
Input Impedance 1 MΩ
Output Impedance 10 kΩ
Signal to Noise* >96 dB
Bypass Hardwire
Current Draw 8.2 mA
Power Supply 9 volts DC
*A-weighted, Vref = 1 Vrms
• Rotate the SPEED knob
clockwise for a faster phase
eect or counterclockwise
for a slower phase eect.
• Leave the SCRIPT switch out for
modern Block logo phase sounds
or push it in for vintage Script
logo phase sounds.
DUNLOP MANUFACTURING, INC.
P.O. BOX 846 BENICIA, CA 94510 U.S.A.
TEL: 1-707-745-2722 FAX: 1-707-745-2658
CONTROLS
SCRIPT switch engages
Script mode
SPEED knob controls
overall eect rate
FOOTSWITCH toggles
eect on/bypass (blue
LED indicates on)
EVH90 PHASE 90


Produktspezifikationen

Marke: MXR
Kategorie: Nicht kategorisiert
Modell: EVH Phase 90

Brauchst du Hilfe?

Wenn Sie Hilfe mit MXR EVH Phase 90 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten